Installation and operating instructions

Technical data:

- Connection: 230 volts ∼ 50 Hz , I = 10 A, P = 2.3 kW

- Ready for operation in 5 minutes

- Low energy consumption: Approx. 1-2 kW per use

- Duration of use: Approx. 30 minutes

- Temperature range: 0 – 80°C

- Time range: 0 – 60 min

(smallest setting increment 7.5 min.)

Tools

You should have the following tools to hand before beginning assembly.

Spirit level Tape measure Drill Electric screwdriver Screwdriver

Allen key Universal cutter Hammer Pencil

Abbreviations / Symbols:

FW - Front wall

cm - Centimetre

mm - Millimetre

ca. - approximately/approx.

- Follow the operating instructions of the IR controller!

We hope you have fun installing your thermal cabin and enjoy it for many years to come.