assembly Instructions

Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.  Copyright HRB 3662
12
5. Preparation/information for assembly and use
5.1. Transport and storage
The product is delivered stacked on pallets.
After unpacking and checking, handle the parts as follows:
Protect the wood against
long-term, direct sunlight moisture contact with the ground
Incorrect storage may result in: - Cracks
- Distortion and warping
- Rotting (infestation by pests etc.)
Store the wood such that it is protected against weathering and
has sufficient ventilation.
Wood is a natural product. Varied colouring, knurls and crack formation are normal and have no influence on the
statics.
Dry cracks may form as a result of extreme weather conditions, especially after long hot periods. These dry
cracks are in no way a defect in quality but are a part of the natural appearance of the wood. Depending on the
weather these cracks may close up again to a minimum. Moreover, these dry cracks, which form longitudinally in
the wood, have no effect on the strength and resilience of the material.
5.2. Packaging
Please do not simply throw away the packaging material. Paper, card and corrugated board as well as
plastic packaging materials should be placed in the correct collection containers.
The pallet on which the cabin is transported comprises two floor beams which are required for the assembly
of the cabin and two distance timbers which are only packaging material and can be disposed of.
5.3 Wood protection
The product is made from natural timber, for which regular and adequate wood preservation measures are
obligatory. Please contact a wood preservation expert for information on professional preservation measures.
Wood preservation is to be carried out by the customer at his own risk. No guarantee can be given in the event of
wood preservation not carried out in accordance with the instructions. Please also note the provisions relating to
this in our guarantee. We wish you much pleasure with your wood product.