Operation Manual

24
Step 8: At last, the LCd symbol appears briefly
on the display and immediately afterwards the
flashing ON symbol. Using the MEM button, you
can now choose between ON (device remains in
the permanent standby mode) and OFF (device
switches off automatically approx. 1 minute after
the last button has been pressed) and save the
selected setting by pressing the SET button. Now,
the device returns to the standby mode. If ON
was selected, the device always remains in the
standby mode. If OFF was selected, it always
switches off automatically from now on approx.
1 minute after the last button has been pressed.
Step 7: On the display, the weekday display
flashes now and you can set the value from 1 to
31 by pressing the MEM button and save the
value set by pressing the SET button.
Step 6: On the display, the month display
flashes now and you can set the value from 1 to
12 by pressing the MEM button and save the
value set by pressing the SET button.
Step 5: On the display, the calendar year
display flashes now and you can set the value
from 2001 to 2099 by pressing the MEM button
and save the value set by pressing the SET
button.
Step 4: On the display, the minute display
flashes now and you can set the value from 00
to 59 by pressing the MEM button and save the
value set by pressing the SET button.
TIME AND DATE
D
USA
19.PJN174-14_GA-USA_HHD-Ohrthermometer_DSO364_28.07.14
Montag, 28. Juli 2014 14:37:39