Instruction Manual

36
Troubleshooting
If there are error messages or incorrect
measurements displayed, remove the batteries and
insert them again after about one minute.
Error Possible causes Solutions
Display
is blank
The batteries are
dead.
Replace both
batteries with new
1.5 V R03/LR03/AAA
batteries.
E 1 The cu is not
worn correctly
Make sure cu
is worn properly
and take a new
measurement.
E 2 You moved while
a measurement
was being taken.
Sit still and take a
new measurement.
13400 EN Aldi US RC6 Content.indd 3413400 EN Aldi US RC6 Content.indd 34 20.04.11 09:52:1820.04.11 09:52:18