User Manual

Chapter 5 FAQ
5-3
Chap.
5
Q: The System Menu does not start.
■Is an "User Program" not set to "Startup"? ---- (P.4-7)
From the System Menu, select "1:System", then "1:Startup" to set the System
Menu for automatic launch.
■To force the launch of the System Menu, hold the scan key then press the
key. ---- (P.4-5)
Q: How do I change the application which starts
when the power is turned ON?
From the System Menu, select "1:System", then "1:Startup" to set the
desired application for automatic launch. ---- (P.4-7)
Q: How do I start another application?
From the System Menu, select "4:File" then "1:Execute" then select an
application to run. ---- (P.4-30)
Q: The barcode is not scanned successfully.
■ Does the scanned bar code meet the barcode settings set in the
application?
Some application settings prohibit a specific kind of barcode from being scanned.
■Isn't specular reflection occurring? ---- (P.2-7)
■Is scanning distance correct?---- (P.2-6)
■Isn't the filter of the barcode sensor dirty? ---- (P.1-4)
If the filter of the barcode sensor is dirty, the bar code may not be scanned
correctly. Please wipe the filter with a dry soft cloth.
Q: How do I check the free area of a drive?
From the System Menu, select "4:File" then select "7:Drive" to check the
drive.---- (P.4-39)