User Manual
Appendix A System Menu Factory Settings
Appendix A -3
App.
A
Item Menu Tree Possible Setting Range Factory Settings
WEP 2:Network→1:RF
→2:Security
→1:WEP
→1:WEP
Disable, 40bits,
128bits
Disable
WEP TxKEY_ID 2:Network→1:RF
→2:Security
→1:WEP
→2:WEP TxKEY_ID
KEY1, KEY2, KEY3,
KEY4
1:KEY1
Key Data 2:Network→1:RF
→2:Security
→1:WEP
→3:KEY Data
Setting the contents
of each WEP key (1,
2, 3, 4).
Characters which can
be used are "0" - "9",
"A" - "F" and "a" - "f."
When a 40 bits is
selected, the WEP is a
fixed 10 characters.
When 128 bits is
selected, it is a fixed
26 characters
AuthenMode 2:Network→1:RF
→2:Security
→2:Authen Mode
OPEN, SHARED OPEN
Preamble 2:Network→1:RF
→3:Advanced
→1:Preamble
LONG, SHORT LONG
RTS_Threshold 2:Network→1:RF
→3:Advanced
→2:RTS_Threshold
Even value of
between 0-3000
bytes
2432 (byte)
IP Address 2:Network→2:TCP/IP
→1:IP Address
value which is divided
into four fields by a
period
000.000.000.000
Subnet Mask 2:Network→2:TCP/IP
→2:Subnet Mask
value which is divided
into four fields by a
period
000.000.000.000
Gateway 2:Network→2:TCP/IP
→3:Gateway
value which is divided
into four fields by a
period
000.000.000.000
DHCP Client 2:Network→3:DHCP Not use
Run now
Run at startup
1:Not use
FTPHost Address 2:Network→4:FTP
→1:Host Address
value which is divided
into four fields by a
period
000.000.000.000
FTP Username 2:Network→4:FTP
→2:Username
up to 18
alphanumeric
characters
No settings
FTP Password
2:Network→4:FTP
→3:Password
up to 20
alphanumeric
characters
No settings