User Manual

1-4 Preparation for Data Communication
1-9
Chap.
1
1-4 Preparation for Data Communication
For data communication between a computer and the CTR-800-11W, perform
the following setup.
■
Wireless communications
Item Description Reference
page
1 SSID Setup Set the SSID (or ESSID) of the
CTR-800-11W to the same as
that of the access point. CTR-
800-11W includes an AP search
function that will acquire and
set up the SSID of an available
access point.
P.4-17
2 Security Setup Make the security settings to
the same as the access point.
P.4-18
3 TCP/IP Setup Set the TCP/IP address to allow
communication with a
computer via the Ethernet LAN.
P.4-22
4 FTP Setup Make the FTP settings to allow
wireless file transfer.
The FTP settings corresponds
to the "WebGlider" FTP server
or general FTP server settings.
P.4-24
5 DHCP Setup Make the DHCP settings when
using the DHCP client function.
This corresponds to the
"WebGlider" DHCP server.
P.4-23
6 DNS Setup Make the DNS settings in the
case where the DNS is used for
name resolution.
Whether or not the DNS is used
depends on the application.
P.4-24
Using the computer side DHCP client function (P.4-23),
can all be
configured at the same time.
When you use the DHCP client function, "WebGlider" is required.
Since setting the "1. SSID Setup" and "2. Security Setup" using the DHCP client
function creates a security weak point, please do not use this function whenever
possible.