User Manual
2-3 Battery Pack (HBC-51)
2-9
Chap.
2
2-3 Battery Pack (HBC-51)
The battery pack is not included with the CTR-800-11W. Please purchase sepa-
rately and use it correctly.
Be sure to follow the precautions below when handling the battery pack.
• After purchasing, be sure to fully charge the battery pack before using.
• Be sure to shut off the power before removing the battery pack. If the
battery pack is removed during operation, the program and data may be
corrupted.
• Be sure not to touch the electrodes with your hand, and avoid dust on the
electrodes. Otherwise this may cause poor contact with the battery pack
and the CTR-800-11W. When dirty, wipe clean with a dry soft cloth etc.
• When installing and removing the battery pack, use a desk or other
appropriate surface as the working table so that it cannot fall onto you
feet.
• Be sure to attach the battery cover before use.
2-3-1 Charging the Battery Pack
Use our dedicated charger (HQC-51/HQC-54) to charge the battery pack.
Charging will be completed in approximately 2.5 hours.
Please purchase the dedicated charger (HQC-51/HQC-54) separately.
For details, please read the instruction manual included with the dedicated charger.