User Manual

2-5 Suspend Function
2-15
Chap.
2
2-5 Suspend Function
The CTR-800-11W supports a suspend function. (P.4-15)
The suspend function can be enabled through the System Menu and if selected,
the next time the
key is pressed on the CTR-800-11W, the suspend function
will be used.
Suspend mode ON After the CTR-800-11W is powered OFF, the
next time the
key is pressed, it will suspend
operation where it was just before the power
was turned OFF.
Suspend mode OFF After the CTR-800-11W is powered OFF, the
next time the
key is pressed, it will begin
operation from the start.
In the case where the battery is disconnected while the power is ON, the operation
will begin from the start regardless of the suspend mode settings. If the DHCP has
been set to "execute at startup," the program process will start from the beginning,
regardless of the suspend mode settings.
In the case where the backup battery is fully discharged, the program will execute
from the start, regardless of the suspend mode settings. Refer to "2-4-1 Charging
the Backup Battery"(P.2-13) for information about charging the backup battery.