User Manual

4-5 System Setup Menu

4-9

Chap.

4-5-3 Clock Setup

Reference the time on the host computer to set up the system time.

You can also set up the time manually. In the case where the DHCP function

(P.4-23) is enabled, this setup can be made automatically.

In order to receive the time from the host computer, please check the following

in advance.

• Has the communication setup (SSID, WEP, etc.) been made correctly?

• Have the access point and the host computer been setup and connect correctly?

• Are the access point and the host computer turned on?

• Is the access point operating normally?

For detailed information on wireless network configuration, refer to the access

point (our recommended item) manual included with the access point.

1. From the System Menu, select "1:System."

2. Then select "3:Clock."

3. Then select either "1:Use DHCP" or "2: Manual

setup."

4. If "1:Use DHCP" is selected, the time data is received

from the DHCP server of the "WebGlider" network

management tool. Once completed, the time will be

displayed.

Press the

key to return back to the previous

screen.

When setting up the clock via the "Server

Setup", the DHCP server of the "WebGlider"

network management tool must be running.

< System Config >

1:Startup 5:Buzzer

2:COM 6:Scanner

3:Clock 7:Suspend

4:LCD

< Clock Setup >

Time and date are

asked to server..

< Date

Time >

2003 / 07 / 01

02 : 35 : 47

< Clock Setup >

1:Use DHCP

2:Manual Setup