User Manual

Chapter 4 Settings
4-10
Chap.
4
5. In the case where wireless communications has
failed, the confirmation screen for manual setup will
appear after several seconds.
If you want to try to receive the time from the server
again, select "1: Retry" then press the
key.
To stop the clock setup, press the
key.
6. When manually entering the time, select "2:Manual"
from either screen (3) or (5) to enter the time.
Use the
or keys to toggle through year,
month, date, hour, minute and seconds, and enter
the values using the numeric keys. Press the
key
to confirm the values you have entered.
To cancel manual entry and return the clock to its original value, press the
key.
Refer to "4-9-3 Clock" (P.4-42) to check the time setting.
4-5-4 Adjusting the Screen Contrast
You can set the contrast of the liquid crystal display in 8 levels.
1. From the System Menu, select "1:System."
2. Then select "4:LCD."
3. Set the screen contrast as follows:
Press the
key to make the display one level
lighter.
Press the
key is pressed, the display will become
one level darker.
Press the
key to confirm the setup and return to
the previous screen.
Press the
key to stop adjusting and return the level back to its original
value.
< Clock Setup >
Failed to sync clock.
Setup by manual?
1:Retry 2:Manual
< Date
/
Time >
2003 / 07 / 01
02 : 35 : 47
< System Config >
1:Startup 5:Buzzer
2:COM 6:Scanner
3:Clock 7:Suspend
4:LCD
< LCD Contrast >
F5← →F8
L H
Sample Sample