User Manual

Chapter 4 Settings

4-14

Chap.

■Setting the power save mode

You can save the battery power by setting the CTR-800-11W to the battery save

mode, as described below.

1. Select "2: Power Mode."

●Continuous On

The power save mode is not used.

●Middle Power

If a barcode is successfully scanned, the laser will turn

off automatically. Since the power supply to the scanner part is still on, the next

time you scan a barcode, the startup time will be shorter than during the full save

mode.

●Low Power

If a barcode is successfully scanned, the power to the scanning part will be

turned off. The next time you scan a barcode, the startup time will be longer than

during the quick save mode.

< Scanner Setup >

1:Trigger Mode

2:Power Mode

< Power Mode >

1:Continuous On

2:Middle Power

3:Low Power