User Manual

4-6 Network Menu
4-17
Chap.
4
■SSID Setup
Note the following when setting the SSID. The SSID can incorporate up to 32
characters consisting of single byte alphanumeric character and symbol. The
characters are case sensitive. Automatic setup is possible when the DHCP
function (P.4-23) s enabled. However, since use of the DHCP function creates a
security weak point, please do not use it whenever possible (refer to P.4-18 for
SSID details).
■Roaming level
When a terminal moves around, this function will select an access point
depending on the strength of the wireless signal and changes access points
automatically. This is called roaming. The value which it is compared against
when performing this change is the roaming level. Automatic setup is possible
when the DHCP function (P.4-23) is enabled.
Roaming is only carried out between access points which have the same SSID.
FAST, NORMAL, SLOW
Possible values
FAST(roaming is easy) ← NORMAL → SLOW (roaming is hard)
■DOZE timeout
This is the length of time until the wireless component changes to DOZE mode
after transmission has finished. Automatic setup is possible when the DHCP
function (P.4-23) is enabled. The shorter this time is, the longer the battery life
will last, although the wireless response falls.
The response time to power-saving mode varies with the access point beacon
intervals and the DTIM setup. Refer to the access point manual for details.
Possible Settings Instantly, 1, 2, 3, 4, 5, 10 seconds, None
■Transmission speed
Set the Transmission speed. Automatic setup is possible when the DHCP function
(P.4-23) is enabled. Any of the following can be selected.
Auto Transmission speed is changed automatically.
1Mbps Fixed Transmission speed of 1Mbps.
2Mbps Fixed Transmission speed of 2Mbps.
1or2M
Transmission speed is automatically changed between only
1Mbps or 2Mbps.
5.5Mbps Fixed Transmission speed of 5.5Mbps
11Mbps Fixed Transmission speed of 11Mbps