User Manual

4-7 Terminal ID Setup Menu

4-29

Chap.

4-7 Terminal ID Setup Menu

Set up the terminal ID of the CTR-800-11W, as described below. The Terminal

ID should be set to a unique number for every terminal in both wireless network

communications and "Welfer II" serial communications. When the DHCP function

(P.4-23) is enabled, this setup can be made automatically.

1. From the System Menu, select "3:TermID."

2. Set the identification number using any combination

of three numbers.

Possible Setting Range 000 ∼ 999

For example, if you want to set the terminal ID to

010, press the keys in the order

, , .

Once the new value is set, press the

key to confirm the change.

When using "Welfer II for Windows" for serial communications, it only recognizes

the last 2 digits of the terminal ID. Keep in mind that a terminal ID of "910" and

"010" are recognized as the same ID "10."

< Terminal ID >

ID： 999

< System Menu >

1:System 4:File

2:Network 5:Status

3:TermID 6:Test