User Manual

4-8 File Menu

4-31

Chap.

4-8-2 Transmitting Files

■ Transmitting Files via Wireless Communications

Files can be transmitted via wireless communication from the CTR-800-11W to a

host computer through an access point. Communication is performed using the

FTP protocol.

Before transmitting a file, please check the following.

・ Have the wireless-communications parameters (P.4-18) been set up correctly?

・ Have the Access Point and host computer been set up and connected correctly?

・ Has the FTP been set up (P. 4-21) correctly?

・ Is the power of the access point and the host computer on?

・ Is the access point operating normally?

・ Has the FTP server started on the host computer?

Refer to the access point (our recommended item) manual for details about the

wireless network structure.

1. Turn ON the power of the CTR-800-11W and select

"4:File" from the "System Menu."

2. Then select "2:Send."

3. From the "Select Interface" select "1:RF."

4. Select a file to transmit and transmit the file.

5. When a message indicating that the file was

transmitted successfully is shown on the CTR-800-

11W screen, press the

key to return to the

previous screen.

< File Menu >

1:Execute 5:Test

2:Send 6:Property

3:Receive 7:Drive

4:Delete 8:Font

< Select Interface >

1:RF

2:IrDA

3:RS232C

< Select File >

S:SAMPLE01.DAT 10K

S:SAMPLE02.DAT 15K

S:SAMPLE03.DAT 25K

< Send File >

S:SAMPLE01.DAT

Complete !