User Manual

4-8 File Menu

4-35

Chap.

4. Turn ON the power of the CTR-800-11W and select

"4:File" from the "System Menu."

5. Then select "3:Receive."

6. Select the method you want to use for receiving the

file. Select "2:IrDA" when using an communication

cradle to performing infrared communication. Select

"3:RS232C" when the CTR-800-11W is connected to

the host computer directly using the PC connection

cable.

7. Select the file storing location. The CTR-800-11W

will then go into a waiting state.

8. Initiate transmission from "Welfer II for Windows" on

the host computer. With this, a download to CTR-

800-11W will start.

9. When a message indicating that the file has been

received successfully is shown on the CTR-800-11W

screen, press the

key to return to the previous

screen.

While transmitting or receiving a file using the communication cradle (HIF-51), do

not remove the CTR-800-11W from the communication cradle.

Refer to the software's included manual for information about "Welfer II for

Windows" Communications Setup.

< File Menu >

1:Execute 5:Test

2:Send 6:Property

3:Receive 7:Drive

4:Delete 8:Font

< Select Interface >

1:RF

2:IrDA

3:RS232C

< Select Drive >

1:S_Drive(SRAM)

2:F_Drive(Flash ROM)

< Receive File >

0001000 /0001000

Complete !