User's Manual
Chapter 3 System menu
3-58ġ
ǴÐï÷åòóáöéîç
Setup for saving the power consumption when scanning.
1. From the sub menu, select the item.
ˁÆõìì
When a Barcode is scanned the laser stops automatically and the
power supply to the scanner part stops as well. The consumed
power gets small, but it takes time to start the next scanning.
ˁÑõéãë
When a Barcode is scanned the laser stops automatically but the
power supply to the scanner part continues as well. The consumed
power is large compared to the Full, but it can perform the next
scanning smoothly.
ˁÎïîå
Power saving mode is not used.
ǴÉòòáäéáôéïîôéíå
Setup the time to turn OFF the laser automatically.
1. Input the time.
The time allowed to setup is from 00 to 60 seconds.
In addition, when 00 second is setup, the laser keeps irradiating
without stop.