User's Manual

3-14 Device Menu
3-71ġ
ǴÏðåòáôéïîáìãïîäéôéïîïæáäåöéãå
In the operation condition, there are two kinds, one is common to all devices and the other is unique to
the device.
1. Enable check box operation (common to all devices).
The switch to turn ON/OFF the operation of the device.
When checked, the device operates, and when the check is removed
the device does not operate unconditional to other setups.
This setup is displayed as an icon.
Press the
key, and sub menu is displayed.
ˁ¢Ðòåöéå÷¢
Current indicator can be experienced
ˁ¢Éîéôéáìéúåáìì¢
Discarding setup contents of the pattern and return to the initial
value.
In addition, when the
Menu is displayed in the left of the lower
part of the display, the operation procedure is common to all the op-
erational condition of devices.
2. Input the frequency (buzzer only)
Setting range is from 0000 to 9999Hz.
The contents of the function key guidance displayed in the left of the
lower part of the display changes during the frequency is entered.
Press the
key, and sub menu of the frequency samples are dis-
played.
Fine-tuning the value based on the samples facilitates the setup.