User's Manual

Chapter 3 System menu
3-86ġ
4. Select an access point, the confirmation screen is displayed to set the SSID setup on the access
point to the terminal. Confirmation screen is displayed to allow the SSID setup on the access point
to the terminal.
³±¶²Âìõåôïïôè
By using other terminal and Bluetooth, one to one communication is performed.
1. From the Test, select "2:Bluetooth".
Select the connecting method with Bluetooth device.
Master has the leadership on connection, and the Slave obey the
Master's direction.
The connection only performed between Master and Slave.
In addition, Master and Slave are only temporary relationship on the
connecting stage.
After the connection the relationship between the Master and Slave
will be dissolved.
Âåæïòå åøåãõôéîç Âìõåôïïôè ãïííõîéãáôéïî¬ ôèå íáóôåò äåöéãå
óèïõìäâåóåôõðáóáÄåæáõìôÄåöéãåïîôèåóìáöåäåöéãå¨ïòáôåò
íéîáì©® ×éôè òåçáòä ôï ôèå óåôôéîç íåôèïä ïæ ôèå ôåòíéîáì¬ ðìåáóå
òåæåòôï¢ǪÒåíïôåäåöéã墨Ю³¶´©®
2. Communication test start.
Press the key, upload the corresponding key data and display on the
screen (local echo) at the same time.
When the data is received, it appears highlighted on the display.