User's Manual

Chapter 3 System menu

3-40ġ

³±°µÓÎÍÐ

Make the various SNMP settings. Automatic setup is possible when the DHCP function (P.3-34) is enabled.

1. From the Network, select "5ȇSNMP".

Select the item to setup.

ˁÃïííõîéôù¨Ò¯Ïîìù©óåôôéîç

ˁÃïííõîéôù¨Ò¯×©Óåôõð

ˁÔòáð

ˁÁäöáîãåä

1. Input the community name and the manager IP address.

ǴÃïííõîéôùîáíå

The operations permitted for a community name are read only. GET and GET-NEXT requests are

supported under a community name. When a SET request is sent using a community name, an authen-

tication trap is transmitted. A community name can be specified using a maximum of 16 alphanumeric

characters.

ǴÍáîáçåòÉÐáääòåóó

Set the SNMP manager's IP address, which permits the use of the community name set under the

"Community name" option. If "000.000.000.000" is set as the IP address, this community name is

permitted on all the SNMP managers.