User's Manual

1-8 Memory Backup Period (Battery for backup)

1-23

■Memory Back up by backup battery

Battery

Battery for Backup

Use

The Clock data built in XIT-100-BW is kept. In addition, The data in the

S drive is saved only for a certain period while replacing batteries etc.

When resume function setup is enabled, the resume information is

stored.

Charging time

Approximately 2 days after fully charged battery pack is attached to the

XIT-100-BW.

Backup period

Data storage period after removing the battery after Normal termina-

tion

is as follows.

・ S drive data and resume information (when resume function is

enabled)：Approximately 15 hours

・ Built in clock data：Approximately 6 months

Data storage period after terminating by Mothball Menu

is as follows.

・ Built in clock data：Approximately 1 Year

(with or without battery pack)

Notes in Use

For details of prolonged storage of the terminal, please refer to"1-9 Not

use in long time" (P.1-24).

The data lost due to the worn out of the battery for back up will not be

restored. Be sure to save the data other than the temporary one in the F

drive.

Normal termination：The termination method after pressing the key remove the battery pack.

Termination by Mothball ：The method to terminate to select mothball from the System menu.

The Memory backup time varies depending on the surrounding envi-

ronment. For example, backup time will be drastically reduced in tem-

perature below 0oC and over 40oC and more. It is recommended to use

the battery at room temperature.