User's Manual

1-10 Resume function
1-25
1-10 Resume function
The XIT-100-BW supports resume function, from System menu, setup, the behavior of the power on by the
key. For setup method, see "3-8-3 Resume (resume function)"(P.3-17).
Resume function enabled
After pressing
key to turn off the XIT-100-BW and start up with
the
key, the processing resumes what was executed immediately
before the power off.
Resume function disabled
After pressing
key to turn off the XIT-100-BW and start up with
the
key, the processing always starts from the first stage.
Please be informed that when the battery pack is removed during the
operation of the terminal, the program will be executed from the begin-
ning regardless whether the resume function is enabled or disabled.
Please be informed that when the back up battery is consumed, the pro-
gram will be executed from the beginning regardless whether the Resume
function is enabled or disabled. With regard to charging the battery for
backup, please refer to "1-7-5 Charging the Backup Battery"(P.1-21).