User's Manual

3-4 System Menu Operations
3-5
3-4 System Menu Operations
Here explains the Standard Operation Method of the System menu.
■Select the target item from the menu
●Selecting a Menu Item
Selected item becomes highlighted (colors reversed= selected).
Move the cursor either by pressing
to key, which corresponds to the item, or, by using the di-
rection (
to ) key.
●confirm the selected item
Press the
key, and, confirm the selected item.
The behavior after confirmation differs according to the item.
・ Execute the corresponding function
・ Show the decision [Yes] or [No] (check box)
・ Next Menu is displayed.
・ Sub menu is displayed.
●Cancel Selecting
Press the
key, to return to the previous operation.
●Screen display
When the items in the Menu are not housed in a screen, the scroll bar for vertical direction is dis-
played on the right of the screen. In addition, when the item name exceeds 1 line, the tail of the item
name is displayed being converted in "→ "
■Input Barcode data
●Barcode Scanning
Press the scan key and irradiates the laser to scan a barcode.
The irradiation time of the laser and scanning behavior are set up with trigger mode. In addition, Bar-
code test menu is not subject to trigger mode.
●Barcode scanning condition
The Barcode that can be scanned in the data input mode is as follows.
NW-7, CODE39, JAN13/8, UPC-A/E, Industrial 2of5, ITF, CODE93, CODE128, RSS-14, RSS
Limited