User's Manual

Chapter 3 System menu
3-20
3-8-5 Auto wake up
Auto wake up is a function to start up the terminal automatically according to the preset schedule. By combining
Auto wake up and DHCP Execute running on, which allow the application and the master file automatically up-
dated before starting operation.
Auto wake up function is enabled only when the terminal is closed by the
key. The terminal will not start up, even at the preset Auto wake up
time, when after replacing the battery or forced termination due to a low
battery.
■Schedule confirmation
1. From the System setup, select "5:Auto wake up".
Currently setup schedule is displayed.
Select the item to setup.
・ Set
・ Clear
■Schedule setting
1. Select Schedule accrual cycle.
Selected from among every day (time is specified), every week
(week and time are specified), and every month (date and time are
specified). Date is set from "01" to "31", time for 24 hours style.
When setting has completed, then return to Schedule confirma-
tion.
Press the
key to stop setting and return to Schedule confirma-
tion.
Input the time in 24 hour-style (00:00 to 23：59).
Thus complete the setup, and return to Schedule confirmation.