C A R D I O P E R F E C T EXERCISE ECG QUICK START GUIDE
i STRESS TEST PATIENT INFORMATION What is a stress test? A stress test (or an exercise ECG test) is used to determine how well your heart and lungs function during physical activity. During the test, you will walk on a treadmill or ride on a bicycle while your heart rate, blood pressure, and electrocardiogram (ECG) are monitored. As the test progresses, the level of exertion is gradually increased. Why does it work? During exercise the body requires more oxygen.
PC-BASED EXERCISE ECG TEST SYSTEM QUICK START GUIDE 1 Install Software and USB Drivers •This Quick Start Guide is intended for use with CardioPerfect Workstation 1.6.0 or higher. •For complete directions for use and warnings, please consult your user manual located on the software CD. PC Interface Connection Patient Cable Connection 2 Connect your Recorder On/Off Switch • Connect the PC interface cable (ProLink) to a USB port on your computer.
5 Select Patient • Open the CardioPerfect Workstation Software by double clicking on the CardioPerfect icon. • To enter a new patient: 1. Click the Patient button. 2. Fill in Patient Card. • To select a patient from the database: 1. In the Search box, type the patient name or number (can be a partial entry). 2. Click the Go button. 3. Click on the patient for whom you want to record the test. 6 Record a Resting ECG (optional) • Most exercise protocols will record a Resting ECG inside the stress test.
9 Monitor and Coach Your Patient The real time monitor window gives you many ways to track patient and test status. They include: • Phase, stage and heartrate • Blood pressure and workload • ST changes Warn your patients when the next stage is approaching to prepare them for changes in speed and elevation. 10 Add Relevant Data to the Test Throughout the test you can add relevant data, including: • Blood pressure – BP can be added at any time by clicking the BP button.
LEAD QUALITY PROBLEMS Condition Causes Actions A dot is flashing on the Lead Off screen. OR Lead-off information is displayed on the screen. OR One or more leads prints as a square wave: • Electrode contact may be poor. • Reattach the lead. • A lead may be loose. • Replace the electrode. • Verify that the electrode area has been properly prepared: shaved, cleaned with alcohol or acetone, allowed to dry. • Verify that electrodes have been properly stored and handled.
