Product Manual

RetinaVue
TM
Network Software–Quick Start Guide
7. Touch Save.
Transfer exam images
1. Place the RetinaVue 100 Imager into the cradle.
2. In the RetinaVue Network software, click Pending
Exams. A list of patients with pending exams appears.
Select your patient and click NEXT.
3. If all required fields have been completed, click NEXT.
Review the images and then click NEXT again.
4. From the Exam Workflow Complete screen, click
Submit Exam.
5. Once the exam has been submitted, a message appears
indicating the exam was successfully submitted. Click
OK.
7. Select the patient from the Patients list.
8. Ensure that the correct patient is selected and that the
demographic information is correct.
9. Touch OK.
Acquire images
Note: The patient’s Right eye will be imaged first.
1. Touch START.
2. Instruct the patient to place their hand over their eye
not being imaged.
3. Acquire an image of the patient’s eye.
4. If the quality indicator is green or yellow, touch the
checkmark in the bottom right corner.
If the quality indicator is red, touch the (Discard) or
(Trash) button in the bottom left corner. Wait at least
1 minute and then acquire a new image of the patient’s
eye.
5. Wait at least 1 minute and then repeat steps “1” through
“4” for the Left eye.
6. After the second image has been acquired and the
checkmark button in the bottom right corner has been
selected, the Exam summary screen appears.
North America Technical Support
865.622.8380
8:00 AM – 5:00 PM EST Monday – Friday
www.welchallyn.com/support
Australia Technical Support
1800 650 083
08:30 – 17:00 Monday – Friday AEDT
[e-mail]
Mat. 725923, 80021805 Ver. A
Revision date: 2016-10
© 2016, Welch Allyn, Inc.
All rights reserved