Specifications

3–25

Additional Programming

Note:

The Keyboard Style Table below applies to

SCANTEAM 3400 software prior to software

revision level 4.0.



[ ASCII function codes (00-1F) are sent to the terminal via a CTRL+" sequence

(i.e., `CR'=CTRL+M)

(If terminal is not listed, then no secondary type keyboard is supported.)

  

IBM PC/XT XT CAPS LOCK

Keyboard Style



SHIFT LOCK



Gr DOS SHIFT LOCK

IBM PC/AT AT CAPS LOCK SHIFT LOCK CTRL" + ASCII [ Gr DOS SHIFT LOCK

IBM PS2 (50-80) NORM CAPS LOCK SHIFT LOCK Gr DOS SHIFT LOCK

HDS 2000, 3200 T/W CTRL +"

IBM 3180 (122 Key) T/W D/E

COMTERM 6178 T/W D/E

TELEX (88 Key) T/W D/E

SIEMENS 9758 NORM CAPS LOCK

NCR 7052 34Key 56 Key

122 Key Caps On 122 Key Caps Off

CTRL" + ASCII [

❖ Keyboard Emulation Mode

(For IBM PC/AT – terminal ID = 03 – only)

➊ ENTER Program Mode

Scan the bar codes below to program Keyboard Emulation

Mode, then enable or disable the selection.

➋ Keyboard Emulation Selection

➌ Keyboard Emulation Mode

➍ Enable ➍ Disable

➎ EXIT Program Mode