Specifications

3–28
Additional Programming
❖ Output Mode Selection:
Buffer Scans
➊ ENTER Program Mode
Scan the bar code below to start Output Mode selection.
➋ Output Mode Selection
Scan the bar code below to program Buffer Scans, then
choose enable or disable.
If enabled , the 3400 accepts a
second scan while transmitting the current scan to the
terminal.
If disabled , the 3400 won’t accept additional scans
until the current scan is output to the terminal.
➌ Buffer Scans
➍ Enable (Yes ✽)
➍ Disable (No)
Programming the 3400 for Wand Emulation mode disables the
Buffer Scans Output option.
➎ EXIT Program Mode