Specifications

3–30
Additional Programming
Output Mode Selection, continued
Function Code Transmit Enabled Example
The SCANTEAM 3400 is connected to an IBM PC XT
and is programmed as follows:
➊ Bar Code Prefix: GS (1D) – F10 key
➋ Bar Code Suffix: CR (0D) – ENTER key
➌ Function Code Transmit: Enabled
When a bar code containing the characters “1234<HT>5678” is
scanned, the 3400 will output the following to the terminal/computer:
F10
bar code
prefix
ENTER
bar code
suffix
The Supported Interface Key “HT” (IBM XT table page 4–4) has
been translated and sent as the Tab key.
123 Tab4 5678
Function Code Transmit Disabled Example
The SCANTEAM 3400 is connected to an IBM PC XT
and is programmed as follows:
➊ Bar Code Prefix: GS (1D) – F10 key
➋ Bar Code Suffix: CR (0D) – ENTER key
➌ Function Code Transmit: Disabled
When a bar code containing the characters “1234<HT>5678” is
scanned, the 3400 will output the following to the terminal/computer:
The “HT” has been stripped from the data string. (The prefix
and suffix are not affected by Function Code Transmit.)
F10
bar code
prefix
ENTER
bar code
suffix
1234 5678