Specifications

SCANTEAM 2010 User’s Guide
The following chart lists the factory default Industrial Symbology Menu settings
(indicated by a 
✱" on the programming menu pages).
Parameter Name
Page
Reference
Default Setting
Code 39 Selections
Symbology Menu Defaults – Industrial
Codabar Selections
Codabar On Page 5-3
StartĂ/ĂStop Characters Don't Transmit Page 5-3
Message Length Min = 1, Max = 60 Page 5-3
Check Character Don't Transmit Page 5-5
Concatenation Don't Require Page 5-5
Code 93 Selections
Interleaved 2 of 5 Selections
Code 39 On Page 5-7
StartĂ/ĂStop Characters Don't Transmit Page 5-7
Check Character Don't Verify Page 5-9
Check Character Don't Transmit Page 5-9
Full ASCII Enable Page 5-7
Append Disable Page 5-7
Message Length Min = 1, Max = 48 Page 5-9
Code 93 On Page 5-11
Page 5-11Message Length Min = 1, Max = 64
Interleaved 2 of 5 On Page 5-13
Check Digit Don't Verify Page 5-13
6, 14 & 16 Only Disable Page 5-13
Message Length Min = 4, Max = 80 Page 5-13
Code 2 of 5 Selections
Code 2 of 5 On Page 5-15
Page 5-15Message Length Min = 4, Max = 48
Check Character Don't Verify Page 5-5
Concatenation Disable Page 5-5
Check Digit Don't Transmit Page 5-13