Specifications

3–4
SCANTEAM 2010 User’s Guide
Example 1: Add Suffix for Specific Symbology
You want to send a CR (carriage return)ĂSuffix for UPC only.
Prefix and Suffix Examples
H Scan the   Suffix Selection bar code.
H The Symbology Chart indicates that the Hex value of UPC is 63". Scan
6 and 3 on the Programming Chart (inside back cover).
H A CR" is equivalent to 0D" (see the Hex ASCII Chart). Scan 0 and D
on the Programming Chart.
H Scan the     Exit Selection bar code.
Example 2: Add Suffix for  Symbologies
You want to send a CR (carriage return)ĂSuffix for all symbologies.
H Scan the   Suffix Selection bar code.
H The Symbology Chart indicates that the Hex value for All Symbologies
is 99". Scan 9 and 9 on the Programming Chart.
H A CR" is equivalent to 0D". Scan 0 and D on the Programming Chart.
H Scan the     Exit Selection bar code.
Example 3: Add Prefix for Specific SymbologyĂ/ĂSuffix for  Symbologies
You want to send a HT (tab)ĂPrefix for UPC only and a CRĂ/ĂLF (carriage
returnĂ/Ăline feed) Suffix for all symbologies.
H Scan the   Suffix Selection bar code.
H The Symbology Chart indicates that the Hex value for All Symbologies
is 99". Scan 9 and 9 on the Programming Chart.
H A CR" is equivalent to 0D" and an LF" is 0A". Scan 0, D, 0, and A
on the Programming Chart.
H Scan the     Exit Selection bar code.
H Scan the   Prefix Selection bar code.
H The Symbology Chart indicates that the Hex value of UPC is 63". Scan
6 and 3 on the Programming Chart.
H An HT" is equivalent to 09". Scan 0 and 9 on the Programming Chart.
Example 4: To Output Code ID as a Prefix for  Symbologies
You want to send the Code ID as a Prefix for all symbologies.
H Scan the   Prefix Selection bar code.
H The Symbology Chart indicates that the Hex value for All Symbologies
is 99". Scan 9 and 9 on the Programming Chart.
H A Code ID" is a special Hex character and is equivalent to 80". Scan
8 and 0 on the Programming Chart.
H Scan the     Exit Selection bar code.
Example 5: To Clear a Specific Prefix Entry
You've programmed the decoder to send a CRĂ/ĂLF (carriage returnĂ/Ăline feed)
Prefix for all symbologies (Hex value, 99). This is one Prefix entry. You've also
programmed a #" Prefix for UPC (Hex, 63). You decide that you want to clear
the UPC entry, but not the Prefix entry for all symbologies.
H Scan the    Prefix Selection bar code.
H The Symbology Chart indicates that the Hex value for UPC is 63". Scan
6 and 3 on the Programming Chart.
The Code ID letter (see Symbology Chart) will be sent with scanned bar code.