Instruction manual

CHANGING PROBES
Depress the latch and unplug the probe connector from the thermometer.
Remove the probe from the storage channel.
Repeat steps 1 through 6 in the SETUP section.
FEATURES
Normal Mode: The thermometer takes oral temperatures in about 4
seconds and rectal temperatures in about 15 seconds. Axillary tempera-
tures taken using the Normal operating mode will display temperatures in
about 10 seconds for patients under 4 years. The unit will always operate
in Normal mode unless the Mode button is depressed for more than 2
seconds after the initial temperature is displayed which changes it to
Monitor Mode. Replacing the probe in the storage channel automatically
resets the unit to Normal mode.
Monitor Mode: Monitor mode is generally used for long term (continuous)
temperature monitoring, taking adult axillary temperatures, or when diffi-
cult situations prevent accurate temperatures from being taken in the
Normal mode.
Oral/Axillary Probe with 4 coiled cord and latching plug to prevent
unintentional plug removal.
Optional Rectal Probe with 4 coiled cord and latching plug.
Mode Button: Recalls the last Normal mode temperature taken, converts
temperatures from °F to °C, switches the unit to Monitor Mode and allows
the clinician to change the probe type from Oral to Axillary.
5