SDS

GHS SAFETY DATA SHEET
Date Revised:
NOV 2014
Supersedes: OCT 2013
WELD-ON® 794™ Low VOC PVC to ABS Plastic Pipe Transition Cement
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Green, medium syrupy liquid
Odor: Ketone Odor Threshold: 0.88 ppm (Cyclohexanone)
pH: Not Applicable
Melting/Freezing Point: -108.5°C (-163.3°F) Based on first melting component: THF Boiling Range: 66°C (151°F) to 156°C (313°F)
Boiling Point: 66°C (151°F) Based on first boiling component: THF Evaporation Rate: > 1.0 (BUAC = 1)
Flash Point: -20°C (-4°F) TCC based on THF Flammability: Category 2
Specific Gravity: 0.927 @23°C ( 73°F) Flammability Limits:
LEL: 1.1% based on Cyclohexanone
Solubility: Solvent portion soluble in water. Resin portion separates out.
UEL: 11.8% based on THF
Partition Coefficient n-octanol/water: Not Available Vapor Pressure: 129 mm Hg @ 20°C (68°F)based on THF
Auto-ignition Temperature: 321°C (610°F) based on THF Vapor Density: >2 (Air = 1)
Decomposition Temperature: Not Applicable Other Data: Viscosity: Medium bodied
VOC Content:
When applied as directed, per SCAQMD Rule 1168, Test Method 316A,VOC content is: < 510 g/l.
SECTION 10 - STABILITY AND REACTIVITY
Stability: Stable
Hazardous decomposition products: None in normal use. When forced to burn, this product gives off oxides of carbon, hydrogen chloride and smoke.
Conditions to avoid:
Keep away from heat, sparks, open flame and other ignition sources.
Incompatible Materials: Oxidizers, strong acids and bases, amines, ammonia
SECTION 11 - TOXICOLOGICAL INFORMATION
Likely Routes of Exposure: Inhalation, Eye and Skin Contact
Acute symptoms and effects:
Inhalation: Severe overexposure may result in nausea, dizziness, headache. Can cause drowsiness, irritation of eyes and nasal passages.
Eye Contact: Vapors slightly uncomfortable. Overexposure may result in severe eye injury with corneal or conjunctival inflammation on contact with the liquid.
Skin Contact: Liquid contact may remove natural skin oils resulting in skin irritation. Dermatitis may occur with prolonged contact.
Ingestion: May cause nausea, vomiting, diarrhea and mental sluggishness.
Chronic (long-term) effects: Category 2 Carcinogen
Toxicity:
LD50 LC50
Tetrahydrofuran (THF) Oral: 2842 mg/kg (rat)
Inhalation 3 hrs. 21,000 mg/m
3
(rat)
Methyl Ethyl Ketone (MEK) Oral: 2737 mg/kg (rat), Dermal: 6480 mg/kg (rabbit)
Inhalation 8 hrs. 23,500 mg/m
3
(rat)
Cyclohexanone Oral: 1535 mg/kg (rat), Dermal: 948 mg/kg (rabbit) Inhalation 4 hrs. 8,000 PPM (rat)
SECTION 12 - ECOLOGICAL INFORMATION
Ecotoxicity: None Known
Mobility:
In normal use, emission of volatile organic compounds (VOC's) to the air takes place, typically at a rate of < 510 g/l.
Degradability: Not readily biodegradable
Bioaccumulation: Minimal to none
SECTION 13 - WASTE DISPOSAL CONSIDERATIONS
Follow local and national regulations. Consult disposal expert.
SECTION 14 - TRANSPORT INFORMATION
Proper Shipping Name: Adhesives
Hazard Class: 3
Secondary Risk: None
DOT Limited Quantity: Up to 5L per inner packaging, 30 kg gross weight per package.
Identification Number: UN 1133
Consumer Commodity: Depending on packaging, these quantities may qualify under DOT as "ORM-D" .
Packing Group: PG II
Label Required: Class 3 Flammable Liquid
Marine Pollutant: NO TDG CLASS: FLAMMABLE LIQUID 3
SHIPPING NAME: ADHESIVES
UN NUMBER/PACKING GROUP: UN 1133, PG II
SECTION 15 - REGULATORY INFORMATION
Precautionary Label Information: Highly Flammable, Irritant, Carc. Cat. 2 Ingredient Listings: USA TSCA, Europe EINECS, Canada DSL, Australia
Symbols: F, Xi AICS, Korea ECL/TCCL, Japan MITI (ENCS)
Risk Phrases: R11: Highly flammable.
R20: Harmful by inhalation. R66: Repeated exposure may cause skin dryness or cracking
R36/37: Irritating to eyes and respiratory system. R67: Vapors may cause drowsiness and dizziness
Safety Phrases: S9: Keep container in a well-ventilated place. S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S16: Keep away from sources of ignition - No smoking. S33: Take precautionary measures against static discharges.
S25: Avoid contact with eyes. S46: If swallowed, seek medical advise immediately and show this container or label.
SECTION 16 - OTHER INFORMATION
Specification Information:
Department issuing data sheet: IPS, Safety Health & Environmental Affairs All ingredients are compliant with the requirements of the European
E-mail address: <[e-mail]> Directive on RoHS (Restriction of Hazardous Substances).
Training necessary: Yes, training in practices and procedures contained in product literature.
Reissue date / reason for reissue: 11/20/2014 / Updated GHS Standard Format
Intended Use of Product: Transition Cement for PVC to ABS Transition Joint
This product is intended for use by skilled individuals at their own risk. The information contained herein is based on data considered accurate based on current state of
knowledge and experience. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof.
EXCEPTION for Ground Shipping
TDG INFORMATION
Target Organs
STOT SE3
STOT SE3
Synergistic Products
Not Established
Not Established
Not Established
Not Established
Not Established
Not Established
Reproductive Effects
Teratogenicity
Mutagenicity
Embryotoxicity
Sensitization to Product
Filename: W-O794LoVoc 11-14.xls Page 2 of 2 11/20/2014 9:41 AM