MSDS

MATERIAL SAFETY DATA SHEET
Frank T Ross and Sons Ltd. Weldbond Universal Adhesive
Page: 2 of 4
SECTION V: FIRE FIGHTING MEASURES
Flammability:
Non flammable
Flash Point deg (C, TCC):
>95 ºC
Means of Extinction:
As appropriate for surrounding fire. Use water, dry chemical, carbon dioxide or foam
Special Fire Hazards:
Fire fighters should wear self-contained breathing apparatus.
Auto-ignition
temperature:
Not applicable.
Flame propagation or
burning rate of solid:
Not applicable.
Sensitivity to static
discharge:
Not applicable
Unusual Fire and
Explosion Hazards.
None expected. As per surrounding fire.
Hazardous
decomposition products:
Oxides of carbon, oxides of nitrogen.
SECTION VI: ACCIDENTAL RELEASE MEASURES
Leak and Spill
Procedures:
Before attempting clean up, refer to the hazard data provided above. Small spills may be
absorbed with non-reactive absorbent and placed is suitable, covered container. For large
quantities, dispose of in accordance with local, provincial/ state or federal regulations.
For large spills prevent from entering sewers and waterways. For large spills provide diking to
prevent spreading.
SECTION VII: HANDLING AND STORAGE
Storage Requirements:
KEEP OUT OF REACH OF CHILDREN. Store in a closed container away from incompatible
materials, which include acids, oxidizing materials.
Storage temperature should be above freezing. Store between 10C/41F and 49C/120F
SECTION VIII: EXPOSURE CONTROL/PERSONAL PROTECTION
Gloves:
Not normally required
Eye Protection:
Not normally required – avoid contact of materials with eyes
Respiratory Protection:
Not normally required if good ventilation is maintained.
Other Protective
Equipment:
As required by employer code. Eye bath, safety shower, protective clothing.
Engineering Controls:
General ventilation normally required. If ventilation practices are not adequate for minimizing
exposure, additional ventilation or exhaust systems may be required.
SECTION IX: PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point (deg C)
100
Specific Gravity (H
2
0 =
1):
1.095
Evaporation Rate
(water=1):
Slow
% Volatile (Wt%):
Approx
48 %
Solubility in water:
Dilutable
emulsion
PH (as supplied):
5.50
Approx.
Physical State:
Liquid
Viscosity:
10,000-
12000cps
Appearance / Odour:
Thick milky white Liquid with low odor
SECTION X: STABILITY AND REACTIVITY
Conditions for Chemical Instability:
Stable
Incompatible Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Oxides of carbon, Oxides of Nitrogen when heated. Hydrochloric acid,
volatile amines and low molecular weight hydrocarbons can be produced.