User Manual

WDRV-7464M/8464M
Operation
12. Operation
A. Press 'MENU' button on set.
The following will appear on the screen.
●
MENU
- Press to enter setup menu
- Selectable OSD menu disappears within 5 seconds if there is no command given.
- Menu Toggle
- Use buttons to navigate menu, adjust menu settings.
●
AUTO SCAN : Shows INPUT signal automatically(CAM1, CAM2, CAM3, CAM4, Half, Quad)
●
OSD :
[
OFF
]
- OSD appears up to 5 sec when camera is toggled
●
ASPECT : Picture ratio control.
(
Wide - 16:9 / Normal - 4:3
)
●
TRIGGER.IN :
[
Auto
]
- Rear & Side view cameras automatically selected
(
input on mode
)
[
Manual
]
- Rear & Side view cameras manually selected
(
input on mode
)
●
TRIGGER TIME : 800ms/1200ms/2000ms/2500ms/3000ms
(
1200ms Default
)
●
TRIGGER PRIO : Set the priority video source when more than two trigger signals enter at the same time.
●
AUTO MOTOR : Pull down time passed by 30sec after operating (ON)
Motorized camera UP/ DOWN
MENU
AUTO SCAN
OSD
ASPECT
TRIGGER.IN
TRIGGER.TIME
TRIGGER.PRIO
AUTO MOTOR
AV INPUT
AV TRIGGER
CAMERA DETECT
<
OFF
>
<
OFF
>
<
WIDE
>
<
AUTO
>
<
800ms
>
<
REAR
>
<
OFF
>
< ON >
< ON >
< AUTO >
MENU
SELECT
●
AV INPUT : [ON] - Available to select AV INPUT signal by select button.
[OFF]-Not Available to select AV INPUT signal
●
AV TRIGGER : [ON] - Automatically select by TRIGGER signal
[OFF] -
Out of select by TRIGGER signal
●
CAMERA DETECT : AUTO / CH1 / CH2 / CH3 or CH4
* Different OSD depends on the Model.
Page1
(Menu)
Page2
(Picture)
Page3
(Function)
Page4
(OSD)
EXIT