PROFESSIONALS PREFER POWERWELD QUALITY WELDING, SAFETY AND INDUSTRIAL SUPPLIES
POWERWELD ® TABLE OF CONTENTS DESCRIPTION PAGE GAS WELDING PRODUCTS Oxy-Acetylene Outfits..................................................................................................... 3-4 Torches & Cutting Tips.................................................................................................... 5 Pressure Gauges............................................................................................................ 6 Regulators, Balloon Fillers, Butane Torches.................
OXY-ACETYLENE OUTFITS METALMASTER TM PROFESSIONAL HEAVY DUTY WELDING AND CUTTING OUTFITS TWO YEAR WARRANTY MM-V & MM-H VICTOR® STYLE HARRIS® STYLE Cuts up to 3/4" or 6" with optional cutting tips. Welds up to 1/2” - 3" with optional welding tips. Heavy duty combination torch, regulator set and accessories housed in a quality stainless steel and metal carrying case for convenient storage.
OXY-ACETYLENE OUTFITS CAPACITY CONSISTS OF Cutting up to 6” (150mm) Welding up to 3/8” (9mm) steel FEATURES Brass & stainless steel construction torch handle with two stainless steel needle valves for fast accurate flame adjustment. O-ring seals. Forged and extruded brass for durability. External torch mounted reverse flow check valves. Complete accessory package, hose, lighter, goggles & tip cleaner.
COMBINATION TORCHES MODEL R100 R1350 R315 R1060 HC231 HC232 STYLE Victor® 100 Victor® 1350 Victor® 315 Victor® 1060 Harris® 63-2 Harris® 73-2 DESCRIPTION Medium Duty Welding Torch Medium Duty Cutting Attachment Heavy Duty Welding Torch Heavy Duty Cutting Attachment Heavy Duty Welding Torch Heavy Duty Cutting Attachment CUTTING TORCHES MODEL STYLE Victor® R1600 R1600-36 Victor® R1600-48 Victor® R419 Airco® 62-3E Harris® 62-3F Harris® 62-3F/70 Harris® 62-3E36 Harris® 62-3F36 Harris® 62-3F36/70 Harris® 62
REPLACEMENT GAUGES Premium quality replacement gauges are the industry standard. Polished drawn brass with one-piece impact resistant polycarbonate posilock lens. For use with compressed gas regulators, these gauges are an excellent choice for original equipment and replacement applications. Gauges are UL listed.
REGULATORS ARGON FLOWMETER MODEL 314RH DESCRIPTION C/W 10' HOSE Single stage light duty argon flowmeter regulator. Designed for accurate control of gas flow for MIG and TIG applications. c/w 10' argon hose and fittings. ARGON FLOWMETER MODEL DESCRIPTION 100FL-AR60H C/W 10' HOSE ARGON FLOWMETER BALLOON FILLERS Single stage piston design professional argon flowmeter regulator. Preset pressure at 50 PSI. Designed for accurate control of gas flow for MIG and TIG applications.
TWIN & SINGLE HOSE TWIN WELDING HOSE GRADES R & T SIZE ID LENGTH GRADE R GRADE T ITEM # ITEM # DESCRIPTION 3/16" 600' Reel Twin Oxygen/Fuel Hose (Reels) 316TR 316TT 1/4" 600' Reel Twin Oxygen/Fuel Hose (Reels) 14TR 14TT 516TR 516TT 5/16" 600' Reel Twin Oxygen/Fuel Hose (Reels) 3/8" 600' Reel Twin Oxygen/Fuel Hose (Reels) 38TT TWIN WELDING HOSE GRADES R & T DESCRIPTION 3/16” 3/16” 3/16” 3/16” 1/4” 1/4” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” GRADE R ITEM # LENGTH Twin Welding H
ELECTRODE HOLDERS SHORTSTUB TYPE • Lightweight - easy to use • Better maneuverability - great for tight places • Excellent for vertical welding • Grips the electrode nearer to the end • Allows use of 20% more of the electrode BERNARD® STYLE MODEL REPLACEMENT HEADS MODEL AMPS RK-4 400 RK-6 600 AMPS 4B 400 6B 600 JAW TYPE • Made from a high copper alloy for maximum conductivity and strength • Long top and bottom tip insulators are fibreglass to withstand intense heat and impact • Suitable for hea
GROUND CLAMPS TWECO® STYLE MODEL AMPS EL-200 200 EL-300 300 EL-500 500 Manufactured from hot dip galvanized •steel with forged brass conductors Heavy-duty springs provide positive •strength at jaws Manufactured from heavy duty nickel•plated steel with forged brass conductors and braided copper strap Heavy-duty spring provide positive •strength at jaws Cable is easy to install with built-in cable •connector and oval point screw LENCO® STYLE MODEL GR-200 AMPS 200AMP GR-300 300 AMP GR-500 500 A
GROUND CLAMPS Heavy duty screw type ground •clamp •Jaws are adjusted by screw lever •Rubber insulated cable connector •Design for MIG welding process •Powerful bite and swivel pad Full 2" opening with a copper •coated steel pressure screw Cable attaches with two oval-point •screws and comes with connector SCREW TYPE MODEL AMPS GCC-600 600 “C” CLAMP TYPE MODEL AMPS ECWG60C 600 insulator Manufactured from nickel-plated steel •with forged brass conductors Large contact area with strong gripping •pow
CABLE LUGS & SPLICERS HAMMER ON LUG PART # CABLE SIZE RL11 SIZE 3/0 TO 4/0 RL22 SIZE 1/0 TO 2/0 RL33 SIZE 4 TO 1 HAMMER SPLICER PART # Manufactured from heavy wall cast copper alloy, annealed for •maximum conductivity Fast, easy installation - just slide in cable and strike it with •hammer for durable connection CABLE SIZE RS11 SIZE 3/0 TO 4/0 RS22 SIZE 1/0 TO 2/0 RS33 SIZE 4 TO 1 SOLDER LUG Manufactured from heavy wall cast copper •alloy, annealed for maximum conductivity Long length and
CABLE CONNECTORS Designed to efficiently conduct the current through a detachable type connector. Brass bodies are precision machined. Cam action design allows lock in with a twist and pulls the two halves together tightly. Connector covers are resistant to heat, cold, abrasion, ozone, oils & solvents. Tapered ends lock out moisture, oil and dirt. Connector covers are specially compounded to be flame retardant.
GOUGING TORCH For gouging, cutting, beveling, piercing and flushing metal. The Gouging Torch is designed to remove any kind of metal by the “Air Carbon-Arc” process which is more economical than older methods such as burning, chipping and grinding. RK4000 GOUGING TORCH MODEL AMPERAGE CABLE ASS’Y RK4000 1000 AMPS 7’ SWIVEL CABLE POINTED GOUGING CARBONS Used for gouging out defective welds and cutting non-ferrous metals.
WELDING CABLE Convenient Cut Length Cable in Boxes PowerWeld carries inventory of the most popular welding and primary cable sizes in convenient pre-cut lengths of 50’ and 100’. These lengths are attractively boxed and ready to go right off the shelf for clean and trouble free cable sales. Flex-a-prene 600 volt all-weather grade welding cable is rated at -50ºC to +105ºC giving it outstanding cold weather flexibility.
MIG FLUX CORED WELDER GAS / NO GAS Welder Specifications 115V/25-130 Amps Welds up to 4.0 mm MIG WELDER MODEL STYLE MM-130E 115V Primary (input) Volts: 120 Vac Primary (input) Amps: 20 Phase: Single Frequency: 60HZ Secondary (output) Volts: 17.5 Secondary (CSA output) Amps: 65 Open Circuit Voltage (Max): 34 Vdc Duty Cycle Rating: 20% Welder Specifications MIG WELDER MODEL STYLE MM-180E 230V Dimensions: 18"(470mm) x 9.4"(240mm) x 12.0"(305mm) Net Weight: 47 lb (21.
INVERTER WELDERS INVERTER STICK WELDER CARiARC 90 90 Amp-20% Duty Cycle 120VAC 1 Phase 60Hz Weight 4.
TUNGSTEN ELECTRODES PowerWeld offers six types of tungsten electrode to cover every TIG welding application. Electrodes are 7" (175mm) in length and packaged 10 rods per box. All tungstens have color coded tips for easy identification, and meet AWS A5.12 specifications. Electrodes are supplied with a smooth, round, bright centerless ground finish. Dia in. (mm) Type Part # Voltage Composition 99.5% Tungsten 0.5% Other Materials Welded Pure (EWP) Unalloyed tungsten electrodes.
MILD STEEL WIRE Specifications AWS A5.18 Class ER70S-6 Certified by CWB to CSA W48-Class ER49S-6 Description S6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires.
FLUX CORED WIRE E71T-GS ALL POSITION SELF-SHIELDING - GASLESS Features No Shielding Gas Needed Single Pass Welding of Thin Gauge Galvanized Steel Excellent for Outdoor Use Smooth Arc – Minimal Spatter DC- Straight Polarity Works Well In Wind Description Smooth Core gasless wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through.
MILD STEEL ELECTRODES PowerWeld 6013 PowerWeld 6013 is a high titania coated electrode. This electrode provides good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with sufficient penetration for welding medium gauge steel. PowerWeld 6013 is an all-purpose electrode that provides a soft steady arc which is easily regenerated, easy slag control for vertical-down welding, low spatter and a beautiful bead appearance.
STAINLESS MIG WIRE 308L - PowerWeld 308L is used for TIG and MIG welding of unstabilized steels such as types 301, 302, 304, 305, 308. The average carbon content of 0.02% produces a weld deposit with good resistance against intergranular corrosion caused by carbide precipitation. This filler metal is the most popular grade among stainless steels, used for general purpose applications. 309L - PowerWeld 309L is used for the welding of similar alloys in wrought or cast form.
AUTO DARKENING HELMETS PROFESSIONAL SERIES Viewing Area : 98mm x 55mm (3.86” x 2.17”) MODEL PWH98551 Auto-Darkening Filter Welding Helmet Solar Powered - Fully Automatic Power on / off Conforms to ANSI Z87.1-2003 and Colts CSA Z94.3-07 Variable Shade Infinitely Adjustable 9 – 13 Switching Speed 0.
ECONOMY WELDING HELMETS ANSI Z87.1-1989 Approved Excellent impact resistant polypropylene Complete with headgear & lenses - individually boxed MODEL WH750 STYLE FLIP FRONT Model WH750 Flip Front Style 2" X 4¼" c/w adjustable head gear, clear & shade 11 lenses. MODEL WH752 MODEL WH754 STYLE WIDE VISION FLIP FRONT Model WH752 Flip Front Style 5½" X 4¼" c/w adjustable head gear, clear & shade 11 lenses.
WELDING & COVER GOGGLES PowerWeld goggles feature soft comfortable sides, adjustable headband straps and air vents to reduce fogging. Provide protection from impact and IR/UV in flame cutting and brazing applications. All models meet or exceed ANSI Z87.1 standards.
FILTER & COVER PLATES FILTER PLATES •Provides ultimate protection from •Precision ground and edged to allow a proper and safe fit • •Hardened glass •ANSI Z87.
MAGNIFIERS & AUTO CARTRIDGES MAGNIFIER - POLYCARBONATE PART NO. MAG-75 DESCRIPTION MAGNIFIER LENS SELECTOR CHART Magnifier Plate Focol Power 0.75 MAG-100 Magnifier Plate Focol Power 1.00 AGE MAG-125 Magnifier Plate Focol Power 1.25 Up to 41 41 - 44 44 - 47 47 - 50 50 - 52 52 - 56 56 - 60 60 - over MAG-150 Magnifier Plate Focol Power 1.50 MAG-175 Magnifier Plate Focol Power 1.75 MAG-200 Magnifier Plate Focol Power 2.00 MAG-225 Magnifier Plate Focol Power 2.25 MAG-250 Magnifier Plate Focol Power 2.
REPLACEMENT VISORS All visors meet ANSI Z87.1 specifications Each visor is individually packaged - 20 per case UNIVERSAL STYLE PART # DESCRIPTION SIZE 804UCL 804BCL Clear Unbound Clear W/alum Band 8” x 12” 8” x 12” 814ULG 814BLG Light Green Unbound Light Green W/alum Band 8” x 12” 8” x 12” 824UDG Dark Green Unbound 824BDG Dark Green W/alum Band 8” x 12” 8” x 12” 844UCL 844BCL Clear Unbound Clear W/alum Band 9” x 15.5” 9” x 15.
WELDING & WORK GLOVES WELDING GLOVE Features ·Durable blue shoulder split cowhide. ·14” length. ·Insulated with cotton/foam lining for added heat protection. ·Reinforced thumb. ·Welted fingers protect stitching. ·Lock stitched with Kevlar® thread for added strength. Features ·Pearl shoulder split cowhide. ·14” length. ·Cotton lined for comfort. ·Welted fingers protect cotton stitching. ·Lock stitched with cotton thread.
MECHANICS GLOVES PowerWeld chooses the highest quality of premium top grain cowhide goatskin, pigskin and deerskin for our mechanics gloves. PowerWeld gloves are stitched with Kevlar® thread for added strength.
LEATHER CLOTHING PowerWeld leather clothing is made from split cowhide for maximum durability and heavy duty protection. Designed to allow complete body movement and freedom while welding. All seams are sewn with Kevlar® thread which is double locked stitched to minimize seam burnout. PowerWeld leather welding jackets incorporate many additional features including: PART NO. Heat and electrical insulated snaps. Inside pockets for extra use. Roll up collar with hook & loop closure. Welted shoulder seams.
CHEMICALS ANTI-SPATTER DYE PENETRANTS Anti-Spatter Nozzle Shield For Mig gun nozzle and welding surfaces quick dry formula, to save time and reduce cost. Reduces spatter build-up on MIG nozzles. Prevents spatter adhesion on surface. Reduces clean up time. Heat-resistant to withstand high temperature use. Non-flammable. Paint compatible. Contains no silicones. Contains no fluorocarbons. Uses CO2 propellent. Private label program available. Available in 16 and 24 oz. aerosols.
CYLINDER & MIG CARTS EASY TO SHIP EASY TO STOCK EASY TO ASSEMBLE CYLINDER CARTS CYT-6SH 6" rubber wheels 41" H x 22" W Holds 40 cu. ft. (B) acetylene and 40 -80 cu. ft. oxygen Side by side MODEL CYT-8CH 8" rubber wheels 41" H x 26" W Holds 75-145 cu. ft. acetylene and 120-244 cu. ft. oxygen Side by side CYLINDERS CYT-6SH Boxed cylinder carts make sense. Easy to ship and easy to stock. MODEL CYLINDERS CYT-8CH MEDIUM SMALL CYT-8CH-1 8" rubber wheels 41" H x 26" W Holds 75-145 cu. ft.
FILLET WELD GAUGES PowerWeld fillet weld gauges are precision inspection tools designed to ensure quality and accuracy. Several models to choose from cover many applications. Features include: •Precision gauge •Constructed of rust proof 22 gauge type 304 steel. •Die blanked to eliminate sharp edges - adds to accuracy. •Permanently etched lettering for long life and abrasion resistance. MODEL MG-8 STYLE •Angle of preparation, 0º to 60º. •Excess weld metal (capping size). •Depth of undercut.
MISCELLANEOUS F CLAMPS C CLAMPS MODEL SIZE THROAT DEPTH MODEL SIZE (”) SIZE (mm) 402 2" 2.25" F-1200-8 8" 200mm 404 4" 3.25" F-1200-10 10" 250mm 406 6" 4.00" F-1200-12 12" 300mm 408 8" 5.00" F-1200-16 16" 400mm 410 10" 6.00" F-1200-20 20" 500mm 412 12" 6.50" F-1200-24 24" 600mm Features: Rugged, heavy duty drop forged steel frame. Steel spindles are tough-hardened. New design frame for maximum strength. Lacquered finish.
MISCELLANEOUS WEED BURNER MODEL PW-500PT HELMET BAG PowerWeld heavy duty helmet & gear bag STYLE PROPANE Store helmet, gloves, and other tools in a safe place. Torch operates on a standard propane tank-no regulator needed. Burn weeds, repair asphalt, peels paint, melts ice and thaws pipe. Comes with 10' neoprene hose, flow control P.O.L. fitting on/off valve, striker - 500,000 BTU rating. HOSE CLAMP PINCERS Drawstring closure & shoulder carrying strap.
MISCELLANEOUS NOZZLE REAMER CABLE HITCH MODEL Cable Hitch allows you to support heavy long lengths of welding cable by hanging it on its handy hook assembly. Comes with a non-slip locking assembly.
MISCELLANEOUS MAGNETS Positioning magnet Small 25# capacity Positioning magnet Medium 50# capacity MODEL SIZE MODEL M061 SMALL M062 SIZE MEDIUM Positioning magnet Large 75# capacity MODEL SIZE M063 LARGE ŸMulti-purpose holders for assembly and positioning ŸAdheres to most metal objects ŸIdeal for welding, soldering, assembly and pipe installation HEAVY DUTY EXTENSION CORDS Super flex extension cord - Super flexible, type SJTW outdoor cord. Lightweight-stays flexible to -67ºF.
MISCELLANEOUS SPOOL ADAPTER WELDER’S PLIERS Universal 4” - 1 & 2 lb Spool Adaptor The universal welding wire spool adaptor quickly adapts most wire feeders and integrated MIG machines to use 4” (1 & 2 lb) spools without removing or altering the spindle assembly.
PROFESSIONALS PREFER POWERWELD QUALITY WELDING, SAFETY AND INDUSTRIAL SUPPLIES PowerWeld products are available from: CATALOG # 214