Learn More At Our Websites! Check out our websites at: www.smithequipment.com www.littletorch.
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-36 .36-37 .38-39 .40-42 .43-46 Gas Mixers & Blenders Proportional Gas Mixers / Blenders . . . . . . . . . . . . . . . .59-63 . . . . . . . . . . . . . . . . . . . . . . . . .67 .68 .69 .70 .70 .71 Merchandisers Smith Showroom Merchandising Displays & Gear . . . . . . .72-73 Accessories Accessories Flashback Arrestors: Torch Mount / Regulator Mount . . GASAVERS™ / Check Valves .
ITW Companies Smith Equipment is an Illinois Tool Works (ITW) Company. For information on welding products available from other ITW Welding Companies, contact one of the following companies. www.hobartbrothers.com 1-888-HOBART9 (1-888-462-2789) Full array of filler metals includes mild steel and low-alloy stick electrodes, solid wires, tubular wires, stainless and hard surfacing products. www.hobartbrothers.
American Classic Outfits Outfits American Classic - Cutting, Welding & Heating Outfits HEAVY DUTY CUTTING, WELDING & HEATING OUTFITS CUTS UP TO 8” (203mm) WELDS UP TO 1/2” (13mm) (With optional tips) These premium heavy duty outfits feature Smith’s proven in-tip gas mixing technology. This greatly improves operator safety and increases torch life. Torches are covered by Smith’s “LIFETIME” WARRANTY, the longest and strongest in the industry. Smith regulators are covered by a 3 year limited warranty.
Outfits American Classic Outfits American Classic – Cutting, Welding & Heating Toolbox Outfits HEAVY DUTY TOOLBOX OUTFITS COMBINATION OUTFIT CUTS UP TO 8” (203mm) WELDS UP TO 1/2” (13mm) HAND TORCH OUTFIT CUTS UP TO 12” (305mm) HTA-30510/HTA-30300 Combination Torch Outfit (With optional tips) These premium heavy duty outfits feature a rugged, high impact plastic toolbox with steel latches to safely transport oxy-fuel equipment. Outfits also feature Smith’s proven in-tip gas mixing technology.
American Classic Outfits American Classic – Hand Cutting Torch Outfits Outfits HEAVY & EXTRA HEAVY DUTY HAND CUTTING TORCH OUTFITS CUTS UP TO 24” (610mm) (HT3 SERIES CUTS UP TO 12” (305mm) (With optional tips) 1 Year Warranty Hand cutting torch outfits are built for the toughest jobs. They feature the cutting torch with a reversible cutting lever and an ease-on oxygen design for smooth starts and restarts.
Outfits American Classic Outfits American Classic – Cutting, Welding & Heating Toolbox Outfits MEDIUM DUTY CUTTING, WELDING & HEATING OUTFITS CUTS UP TO 6” (153mm) WELDS UP TO 3/8” (9.8mm) (With optional tips) These premium outfits feature quality construction throughout and are built to provide reliability and extended service. Toolbox Outfits feature rugged, high impact plastic toolbox to safely transport oxy-fuel equipment. Outfits feature Smith’s proven in-tip gas mixing technology.
American Classic Outfits With Standard SC & MC Style Cutting Assemblies Outfits CLASSIC HEAVY & MEDIUM DUTY TOOLBOX OUTFITS OXYGEN-ACETYLENE COMBINATION OUTFITS HEAVY DUTY CUTS TO 8" (203mm) MEDIUM DUTY CUTS TO 6" (153mm) HEAVY DUTY OUTFIT SC-510T/SC-300T (With optional tips) These premium outfits feature a rugged, high impact toolbox to safely transport the outfit components. Outfits include the traditional, lighter weight SC & MC style cutting attachments.
Medium Duty Outfits Toughcut™ Outfits TOUGHCUT™ CUTTING & WELDING OUTFITS CUTS UP TO 6” (153mm) WELDS UP TO 3/8” (9.8mm) (With optional tips) Versatile “TOUGHCUT” cutting and welding outfits include many features found on more expensive outfits. The TOUGHCUT series is perfect for a multitude of applications such as farm, ranch, hobby, automotive, refrigeration, light fabrication, and repair. Outfits feature rugged, reliable Smith Series 30 medium duty regulators.
Torch / Tip Combo Packs Heavy & Medium Duty Outfits COMBINATION TORCH/TIP KITS OXYGEN-ACETYLENE HEAVY DUTY KIT SC TORCH CUTS TO 8" (203mm) MEDIUM DUTY KIT MC TORCH CUTS TO 6" (153mm) (With optional tips) These premium, versatile kits come with tips to do most any job. They include our classic SC & MC Cutting Assemblies which are backed by our "LIFETIME" WARRANTY. Also included are a heating tip, welding tip and 3-cutting tips.
Dual Guard™ Outfits Outfits Dual Guard™ Outfits are designed with a Flashback Arrestor built into the Torch Head Heavy Duty Combination Outfits Torch Cutting Welding Handle Attachment Tip Cutting Tip Heating Tip Oxygen Regulator Fuel Gas Accessories Regulator Included SW205 SC12-1&2 ST602 40-175-540 40-15-510 Yes DG209 SW205 SC12-1&2 ST602 40-175-540 40-15-300 Yes DG209 SW205 SC12-1&2 ST602 40-175-540 40-15-510 No WH200 DG209 SW205 SC12-1&2 ST602 40-175-540 40-15-300 No WH
Standard/Medium Duty Outfits Versa-Torch™ Refrigeration & Air Conditioning Outfit ACETYLENE TAG-A-LONG™ KIT Portable, lightweight Smith Tag-A-Long Cutting and Welding Outfits are ready to go where you need them. Compact design stores easily for road travel or when not in use. Smith Series 30 Regulators provide efficient and dependable control of gases. Torch and regulators covered by a 3 year limited warranty.
Quickbraze® Outfits Oxy-Fuel Outfits - Refrigeration/Air Conditioning S6 Single Flame Tip T7 Twin Flame Tip C2 "C" Style Tip 23-5005A 14711 (Adapts to A or B Style Regulator Connections) Heating Tip Quickbraze® Tip Data Chart Stock Number S4 S6 T7 C2* C6* 14711* A3 LP2* Gas Pressures PSIG Settings Oxygen Fuel 8 8 8 8 8 8 7 5 10 8 12 10 8 8 25 10 Consumption Rate (CFH) Oxygen Fuel 0.8 0.6 3.2 3.4 9.8 7.6 6.4 7.2 9.6 10.8 14.7 9.7 8.4 7.
Standard Duty Versa-Torch™ Standard Tip Selection Chart 10” Oxygen Fuel Oxygen Fuel 14 10 17 17 16,080 13715 14 10 38 12 16,600 AT600 Series Tips Include LT103 Tip Ends AT600 Series Tips Include LT103 Tip Ends 6” 6” AT60 Threaded Tip Tube Brazing Tip Assembly AW200 Series (see table below) AT600X6 Flexible Twin Flame Tip AT61 Threaded Tip Tube s n Tip w-O ries Scre Se 50 NE1 AT600X6 Flexible Twin Flame Tip 00) AT6 1 or AT6 With (Use (Us eW ith AT6 0o r AT 600 ) AT600 Flexible Twin
Standard Duty Outfits Versa-Torch™ / Quickbraze® Tip Selection Chart LP Twin Flame Tip AT400 (Propane, Natural Gas, Propylene) Tip Comes With A3 Tip Ends For Acetylene or LP Gas Screw-On Tip Available For LP Gas Only LP2 Flexible 5” Single Flame Tip S4, S6 Flexible Tubes Kevlar® Brazing Hose Twin Flame Tip T7 LP Adaptor AT41 (injector) (works to 4 oz.
Handi-Heet® Outfits Acetylene-Air Outfits - Soldering, Brazing, Sweating & Heating ACETYLENE-AIR HANDI-HEET® OUTFIT Handi-Heet® soldering outfits provide fast heat with acetylene and atmospheric air. Concentrated soft flame delivers 1700° F heat just where it is needed for maximum performance on all types of soldering, heating, thawing and other applications. No oxygen tank required. Tough NE180A torch handle is built to last – machined from solid brass.
Jewelry/Hobby Outfits SILVER SMITH™ Designed for jewelers, silver smiths and hobbyists. (Excellent choice for light brazing and soldering.) Air-fuel torches deliver the ultimate in quality and flame control. The all metal torch provides strength and long life, while precision jeweled orifice tips produce a soft, consistent flame. The Silver Smith™ torch system is designed to work with air and acetylene gas.
™ The Little Torch 23-1015P Propane Caddy 23-1015P Propane Caddy Includes 13558 (5 lb.) refillable propane tank, 0C20 (20 cu. ft.) oxygen tank, 11-110IC torch with 8 ft. (2.4m) covered hoses, #3-7 tips, 30-20-540 oxygen regulator, 30-15-510 propane regulator, H698 pair reverse flow check valves, 13787A powder coated metal carrier and complete operation and instruction manual. 14014 MAGNETIC TORCH STAND & TIP ORGANIZER Solid metal stand comes with holes drilled and numbered for #2-7 tips.
™ The Little Torch Flexible Tip Extension Outfits Tips & Technical Information For Customizing Angle And Distance From Handle Sapphire Tips CURVED 12-1401-07 Due to the extraordinarily small orifice diameter of tips sizes #2-3, tips are fitted with a laser drilled synthetic sapphire to assure accurate gas flow and consistent flame characteristics. Flexible TWIN FLAME 12-1402-04 STRAIGHT 129-124-04 Stock No. 2327-3SP Length 3” (76mm) ALL TIPS ARE 100% FLAME TESTED Size CURVED Stock No.
Torch Handles Smith torch handles are available in three capacities to match job requirements — Heavy, Medium, and Standard Duty. Torches have silver brazed joints to provide overall strength and rigidity for safe performance under rugged conditions. Torch handles are individually tested to maintain the Smith reputation for quality and dependable performance. And all standard Smith torches are covered by our exclusive "LIFETIME" WARRANTY & Service Agreement. 1.
Torches Torch Handles HEAVY DUTY HANDLE WH200 (Supercedes SW1B Handle) Heavy duty handle allows high gas flow for large cutting tips and heating tips. Heavy duty handles have replaceable hose connections. All handles are covered by Smith's "LIFETIME" WARRANTY and Service Agreement (excluding CW5A Toughcut handle). Inlet connections, 9/16"-18, fits "B" hose connections. USED WITH: Cutting Attachments - SC209, SC200, SC205, SC509 & DG205, DG209, DG200. Welding Tips - SW200 & 400 Series.
Cutting Attachments Smith Equipment’s Cutting Attachments are covered by our exclusive "LIFETIME" WARRANTY & Service Agreement. Excluding Toughcut. Genuine Smith tips must be used to qualify for warranty repair. 1. Manganese Bronze Head 2. Slip-In Cutting Tips Torches FEATURE BENEFITS 1 Manganese Bronze Head Super tough thick wall manganese bronze head reduces heat warping and damage. (Medium Duty Head - Brass) 2 Slip-In Cutting Tips Saves time when changing tips - no wrench needed.
Cutting Attachments Heavy Duty/Medium Duty Heavy Duty Cutting Attachments Torches SC205 Length 12-1/2” (318mm) Weight 1 lb., 14 oz. (.83kg) SC209 Length 12-1/2” (318mm) Weight 1 lb., 14 oz. (.83kg) SC205 & SC209 Cuts up to 8” (203mm) thick steel. Solid silver brazed construction. Features “O” ring seating and easy-to-change slip-in Graf-Tite cutting tips with cost saving soft-seats. Covered by the "LIFETIME" WARRANTY & Service Agreement.
Cutting Attachments Standard Duty Airline™ - Standard Duty Cutting Attachments Small light weight cutting torch with cutting capacity up to 3” thick (76mm) steel. Has same quality construction and features built into each Smith cutting attachment. Covered by the "LIFETIME" WARRANTY & Service Agreement. Torches USE IN: Torch Handles - AW1A, AW10A. Stock No.
Hand Cutting Torches 4. Manganese Bronze Head Torches 5. Slip-In Cutting Tips FEATURE BENEFITS 6. NickelPlated Surface 1 Three Tube Construction Keeps gases separated, eliminating mixing tube burnout. Smith’s thick wall, high capacity stainless steel tubes provide high gas flow and superior strength. 2 Reversible - Ergonomic, Cutting Lever Top or bottom mount lever for ease of use.
Hand Cutting Torches Heavy Duty Standard Duty SC Series Cuts Up To 12” (305mm) (Any Fuel Cutting torches feature solid construction and ease of operation for hundreds of jobs in construction, fabricating, shipyards, salvage and other related industries. Silver brazed joints throughout. Head and butt are machined from dense brass forgings. Ball style control valves provide positive gas shut-off. All SC Series torches listed below are covered by Smith’s “LIFETIME” WARRANTY.
Hand Cutting Torches Extra Heavy Duty (Any Fuel Gas & Oxygen) Torches Gas Axe™ Extra Heavy Duty SC929 Cuts Up To 24" (610mm) Hand cutting torches are built for the toughest jobs. They feature a reversible cutting lever and ease-on oxygen for smooth starts. The torch is also designed with a heavy wall manganese bronze head for durability and resistance to heat warping. Ideal for foundry, scrap and demolition operations.
Machine Torches Machine Cutting Torches Smith’s heavy duty machine torches provide superior performance. Ease-on cutting lever reduces blow back in piercing and key-holing in re-starts extending tip life and provides high quality cuts. Torch barrels easily adjust to 4 positions at 90° increments. Barrel diameters are 1-3/8” (9.5mm) to fit most machines. Stainless steel ball type valves provide fine adjustment and positive shutoff.
Hand Cutting Torches Gas Axe™ Torches 1. Slip-In Cutting Tips 2. Manganese Bronze Head Gas Axe™ Extra Heavy Duty Torches Ideal for Scrap/Demolition Cutting Safety engineered; designed for severe applications. Excellent for use with Propane or Natural Gas. Works with all gases including Propane/Propylene based fuels, Natural Gas & Acetylene. Extra high capacity cuts to 24” (610 mm) with Acetylene. Cuts to 20” (508 mm) with Propane. Backed by a one year warranty.
Hand Cutting Torches Gas Axe™ Extra Heavy Duty Torches Recommended Hose Sizes & Recommended Pressures Recommended High Flow Regulators SC50 Series - Propane/Nat. Gas Tips, Sizes 6-9 Minimum Recommended Pressure Settings (PSIG) Model Number Tip Pressure 1/4” Dia. Hose Size At Torch 50 ft. 100 ft. 3/8” Dia. Hose 50 ft. 100 ft. 200 ft.
Slicer™ Cutting Tips 7. Removable Seat 2. Slip-In Design 4. Graf-Tite® Soft Seat Tips Preheat Oxygen 1. InTip Mix Fuel Port LONGEST LASTING TIPS YOU CAN BUY Whatever your application, whatever your fuel gas, there’s a Smith Slicer™ tip to provide fast, economical and quality cutting. Soft seats are not prone to damage like metal-to-metal seats, providing consistent seating and much longer life than metal to metal seats.
Cutting Tips Guide For Heavy & Medium Duty Tips Heavy Duty SC Series Tips ACETYLENE PROPYLENE PROPANE NAT. GAS SC46 SC60 SC12 SC40 SC56* SC50* Tips NOTE: Last digit in tip part number indicates tip size. i.e. - SC12-3 has Size 3 cutting orifice. CAUTION: When using liquid oxygen, tips may require greater gas volume than a single cylinder is capable of producing. External evaporators or manifolding multiple cylinders may be necessary to supply sufficient gas flows.
Cutting Tips Heavy Duty “SC” Acetylene SC12 Series Tips SC12 Series Tip Number SC12-00 SC12-0 SC12-0 SC12-1 SC12-1 SC12-2 SC12-2 SC12-2 SC12-3 SC12-3 SC12-4 SC12-4 SC12-4 SC12-5 SC12-5 SC12-5 SC12-6 SC12-6 Oxy-Acetylene Six preheat cutting tips for general hand and machine cutting. Provides excellent preheat characteristics required for machine cutting. USE IN: Cutting Attachments - DG200 & SC200 Series (Maximum size SC12-5). All SC & DG Series Hand Torches. All Machine Torches.
Cutting Tips Heavy Duty “SC” / Propane, Natural Gas, Propylene Oxy-Propane Oxy-Natural Gas SC40 Series Two-piece medium preheat cutting tips for general hand and machine cutting with propane, propane base fuel gases and natural gas. USE IN: All SC & DG Series Hand Torches, Machine Cutting Torches & Cutting Assemblies. SC40 Series Standard Preheat Two-Piece Tip Number Pressure - PSIG Cutting Oxygen Preheat Reg.
Cutting Tips Heavy Duty “SC” / Propane, Natural Gas SC50 General and Heavy Cutting Oxy-Propane Oxy-Natural Gas Tips Heavy preheat two-piece cutting tip series for hand and machine cutting up to 20” (508mm) thick steel. USE IN: Cutting Attachments - DG200 & SC200 Series (Maximum size SC50-5) All SC & DG Series Hand Torches. 2-Hose Machine Cutting Torches (Maximum size SC50-6) All 3-Hose Machine Cutting Torches.
Cutting Tips Heavy Duty “SC” / Propane, Natural Gas SC46 One Piece Rugged Duty Cutting Oxy-Propane Oxy-Natural Gas One-piece cutting tips designed for cutting dirty or heavily coated metals for rugged use to include scrapping, heavy construction or where excessive reflected heat is present. SC46 Series Cutting Attachments - DG200 & SC200 Series (Maximum size SC46-4). All SC & DG Series Hand Torches. All Machine Cutting Torches.
Cutting Tips Heavy Duty “SC” / Propylene SC60 Series (Also propylene based fuel gases) Oxy-Propylene Two-piece medium preheat cutting tips designed to provide optimum performance with propylene or propylene base fuel gases. Cutting Attachments - DG200 & SC200 Series (Maximum size SC60-5). All SC & DG Series Hand Torches. 2-Hose Machine Cutting Torches (Maximum size SC60-6). All 3-Hose Machine Cutting Torches.
Cutting Tips Heavy Duty “SC” Special Purpose / Acetylene Gouging Tip SC13-3 & SC13-5 For edge preparation, removal of welds or gouging cracked metals. Gouging SC13-3 Rivet/Riser Cutting - SC14-3 Cuts heads of bolts and rivets. It can also be used in 180° head cutting torch to cut out boiler tubes. Works equally for cutting risers and bulk heads. Rivet/Riser Cutting SC14-3 Rivet Blowing & Metal Washing Quickly removes large quantities of metal.
Cutting Tips Medium Duty MC12 Series Oxy-Acetylene Slip-in cutting tips for general medium duty hand cutting. Use with medium pressure acetylene and oxygen. MC12 Series Oxy-Acetylene Tips Tip Number Cutting Attachments - DG109A, MC505, MC509, CC509P (all sizes); AC309 (Maximum tip size MC12-4). USE IN: Metal Thickness Inches mm Pressure - PSIG Oxygen Acety. Consumption - SCFH Oxygen Acety. Cutting Preheat Preheat Kerf Width Drill Size Cutting Preheat Jet MC12-00 1/ ” 8 3 20* 10 .
Cutting Tips Medium & Standard Duty “MC” / Alternate Fuel Gas MC40 Series Two-Piece Tips Oxy-Propane Two-piece medium preheat cutting tips for hand cutting with propane and propane base fuel gases. USE IN: Cutting Attachments - DG109A, MC505, MC509, CC509P; AC309. MC60 Series MC40 Series Propane & Propane Based Fuels Oxy-Propylene Two-piece medium preheat tips for hand cutting with propylene and propylene base fuel gases.
Welding Tips 1. “Soft Flame” SMITH “SOFT FLAME” - Makes Welding Easier Smith welding tips are quality engineered to provide easy handling, high performance and added protection in welding, brazing and soldering operations. Tips 1 4. Heavy Wall Copper 2 3 4 Individual Mixers “Soft Flame” - Makes Welding Easier Smith “soft flame” welding tips provide concentrated heat for better “puddle” control — the turbulent-free flame eliminates puddle chasing.
Welding Tips Heavy Duty “SW” Series SW200 Series Oxy-Acetylene The SW200 Series is for general and heavy welding and brazing. Swaged construction provides greater heat concentration for improved “puddle” control. Tips bent to 63-1/2° angle. USE IN: Torch Handles - WH200 & SW1B. SW209 FUEL GASES: These tips may also be used for brazing with Liquid Air Fuel-Gas or brazing with propylene base fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.
Welding Tips Medium Duty “MW” Series MW400 Series Oxy-Propane/Natural Gas General purpose medium duty brazing tip designed specifically for use with propane or propane base mixture fuel gases with oxygen. Also used for melting Platinum, up to 2oz. Replaceable “O” rings: MW15 (Pkg. of 25). MW411 Tips USE IN: Torch Handles - WH100, MW5A & CW5A. Tip Number MW411 Pressure (PSIG) Oxygen Propane 11 11 Consumption Each Oxygen Propane 51.
Heating Tips Heavy Duty / Oxy-Acetylene Actual Size Tips ST605 Heating Tips Used in Welding Handles Smith’s multi-flame and single flame heating tips are designed to provide large volumes of heat for applications such as: heat treating, bending, straightening, ST603 ST605 ST610 pre-heating, brazing, shrinking, forming and many others. Smaller sizes are often used for braze welding or for applying hard facing metal to large areas. Heating tips provide significant cost savings in many applications.
Heating Tips Heavy Duty - Oxy-LP Actual Size Tips ST625 ST615 Medium pressure oxy-propane or propane based heating tips provide high heating performance with low cost fuel gases including natural gas and propane based gases. USED IN: Torch Handles - WH200 & SW1B. NOTE: ST635 requires 3/8” I.D. (10mm) hose and HB1522B-510 propane cylinder regulator. Tips CAUTION: Heating tips must be used in conjunction with high flow flashback arrestors.
Heating Tips Heavy Duty / Propylene ST825 ST815 Actual Size ST825 Head Actual Size ST815 Head ST815 - ST825 - Torch Head Stock No. 4639 Torch Head Stock No. 4642 Stock No. No. of Flames Uses ST815 Fluted Propylene ST825 High capacity heating tip: Use in WH200 & SW1B torch handles with 3/8” (10mm) I.D. hoses. Tips Medium capacity tip: Use in WH200 & SW1B handles.
Special Purpose Heating Tips Special Heavy Duty Heating Tip JX16 Aluminum Extrusion Cutting Tip Oxy-Propane or Natural Gas Used to “cut” aluminum extrusions - actually melts the aluminum rather than cutting it as a standard tip cuts steel for a straight edge cut. The JX16 is perfect for use in aluminum extrusion mills and in any other situation where similar cuts are needed. Can also be used as a heating tip. May also be used to texturize stone/brick. Uses LP Gas or Natural Gas with Oxygen.
Regulators Premium Heavy Duty Series 40™ (Single Stage Pressure Regulators) 5. Delrin™ Bonnet Insert 4. Die-Cast "T" Bar Adjusting Screw 3. Stainless Steel Diaphragm Sure-Seat™ Filtered High Pressure Seat Assembly 6. Nickel Plated Bonnet 2. Color Coded Labels 7. Dual Filters Including Sure Seat™ Regulators Flowmeters 8. Shatter Resistant Gauge Lenses 1. External Relief Valve FEATURE BENEFITS 1 External Relief Valve Protects regulator from damage due to inadvertent high pressure surge.
Regulators Heavy Duty Single Stage Series 40™ Regulators Regulators Flowmeters Regulator With Hard Hat™ BRASS CONSTRUCTION FOR DEPENDABLE SERVICE IN CORROSIVE ATMOSPHERES Series 40™ single stage regulators comprise a complete line of versatile regulators for welding, cutting, heating and other industrial applications. Heavy duty construction and simplified design provides high gas flow and longer trouble-free operation. Stainless steel diaphragm allows use with liquid gases.
Regulators Medium Duty Single Stage Series 30™ Regulators Sure-Seat™ Filtered Seat 30 15 510 SERIES MAXIMUM OUTLET PRESSURE CYLINDER CGA CONNECTION 3 Year Limited Warranty Regulators Flowmeters Flow Data & Cross Reference to old model numbers available on Smith Website under Tech & Safety Info. smithequipment.com Rugged medium duty industrial grade regulators are extremely durable and contain Smith's exclusive Sure Seat™ filtered seat technology for extended seat and regulator life.
Two Stage Regulators Series 30™ - 2 Stage Series 30™ Two Stage Regulators Drop cylinder pressure to working pressure in two stages for consistent and accurate outlet pressure and flow regardless of inlet pressure. Recommended where outlet pressure and flow must be maintained without variation. 100% TESTED AND INSPECTED 3 Year Limited Warranty H197 “Hard Hat”™ Gauge/Regulator Guards see page 70 Flow Data & Cross Reference to old model numbers available on Smith Website under Tech & Safety Info.
Regulators Series 30™ Regulator Twin Packs FEATURE BENEFITS 1. Solid Brass Industrial Construction 2. Durable Teflon® High Pressure Seat 3. Convenient & Economical 4.
Regulators High Pressure - 820 Series Patented Heavy Duty High Pressure Regulators 820 Series high pressure regulator series for use on cylinders with a wide variety of non-corrosive inert gases. Piston sensor design gives structural reliability in high pressure use. Low torque control adjusting screw permits easy adjustment of pressures in closed or dead end systems.
Regulators Flowmeter Regulator FEATURE BENEFITS SMITH’S EXCLUSIVE SELF-CENTERING BALL FLOW TUBE Smith’s exclusive ball-centering flow tube provides accurate flow readings even if the tube is tipped. This ensures good weld quality and gas savings. SERIES 30™ FLOWMETER REGULATOR Unique Self-Centering Ball Guide Exclusive self-centering design retains ball in the center of gas flow for accuracy and savings. 2 Extra Long Flow Tube Expanded scales are easy to read and accurate within 3% of full reading.
Regulators Flowmeter Regulators SERIES 30™ PREMIUM SINGLE STAGE FLOWMETER REGULATORS 35-30-320 2-Stage High Flow Rugged medium duty industrial grade regulators provide Carbon Dioxide efficient and accurate regulation, also includes selfcentering flowball. Has many features found in more expensive flowmeter regulators. Contains Smith's exclusive Sure Seat™ filtered seat technology for extended seat and regulator life.
Regulators Series 30™ Dual Flowmeter Regulator FEATURE BENEFITS • • • • • • • Dual Scale Calibration Preset at 50 PSIG Back Pressure Compensated Flow Tube Sensitive Needle Valve for Fine Adjustment Durable Lexan™ Flow Tube Cover Large 2” (51mm) Cylinder Contents Gauge Dual Scale Stock No.
Regulators Flowmeters Flowmeter assemblies are designed to operate at an inlet pressure of 30 PSIG (except H1105 which is designed to operate at an inlet pressure of 80 PSIG). They may be attached to regulators or pipeline installations. All flowmeters have 1/4” (6mm) NPT female inlets. FEATURE BENEFITS Flow tube is extra long and is accurate to within 3% of the full scale reading. Tubes are made of shatter resistant Lexan™.
Regulators Series 30™ Single Stage Flow Gauges 31-50-580 31-50-580-6 3 Year Limited Warranty FEATURE BENEFITS Compact Design Machined Brass Body Neoprene/Nylon Diaphragm 2” (51mm) Diameter Gauges Protective Inlet Filter - Sure-Seat™ Self Re-Seating Pressure Relief Valve 0 - 4000 Inlet Gauge 10 - 50 SCFH Delivery Gauge Stock No.
Gauges Premium Quality Pressure Gauges Smith Equipment Replacement Pressure Gauges are manufactured in accordance with Smith’s rigid quality standards. All gauges feature precision watch type movements for optimum accuracy. Gauges are supplied in convenient “Slider-Pak” packaging for attractive display, allows removal and inspection of product without damage to packaging. FEATURE BENEFITS 2” Gauge (51mm) • 2” (51mm) and 2-1/2” (64mm) Gauges U.L. Listed. Part No.
Gas Mixers Proportional Gas Mixers Typical Applications • • • • • • • Weld and purge with a variety of gases Accurate TIG and MIG weld shielding Mixed gases for the foundry industry Accurate mixing of gases for the aerospace industry Laboratory applications Gas mixtures for plasma arc cutting machines Controlling the atmosphere in heat treat ovens • • • • • Mixtures are maintained with any selection Mixture accuracy is unaffected when inlet pressure remains within specified limits Reduced set-up time eli
Gas Mixers Proportional Standard 2-Gas Mixers STANDARD 2-GAS MIXER - 180 SCFH/85 LPM Standard Two Gas Mixer 180 SCFH/85 LPM Required Inlet Pressure/ Gas PSIG/Bar Outlet Pressure Without Flow PSIG/Bar* Stock No. Gases Adjustment % Range 299-006-1B Argon CO2 0-100% 100-0% 105 - 115 7.3 - 7.9 50 / 3.5 299-006-3B Argon Helium 0-100% 100-0% 105 - 115 7.3 - 7.9 50 / 3.5 299-011-1B Dual Scale Argon Hydrogen 50-100% 50-0% 105 - 115 7.3 - 7.9 50 / 3.
Gas Mixers High Capacity 2-Gas Mixers HIGH CAPACITY 2-GAS MIXER - 700 SCFH/330 LPM SPECIFICATIONS Flow Rate Inlet Connection Outlet Connection Inlet Filters, mixer protection only PN: 8203 Case Material Weight Size (WxDxH) 20-700 SCFH / 9.4-330 LPM 1/4” FNPT 1/2” FNPT 60 Micron Nominal 304 Stainless steel 17 lbs. - 7.5kg 14” x 11” x 7” (356mm x 279mm x 179mm) High Capacity Two Gas Mixer 700 SCFH/330 LPM Replacement Mixer Inlet Filters: Part # 8203 HIGH CAPACITY 2-GAS MIXERS - 700 SCFH/330 LPM Stock No.
Gas Blenders Proportional PROPORTIONAL GAS BLENDERS For Controlled and Modified Atmospheric Packaging of Food Products FEATURE BENEFITS • Select from a variety of gas percentages to meet your packaging needs • Mixtures are maintained with any selected proportion with no gas separation • Mixture accuracy is unaffected when inlet pressure remains within specified limits • Reduced set-up time eliminates the need for premixed gases • Ideal for mixture development for food packaging • Laboratory and research app
Gas Blenders Proportional - 2-Gas Blender - 700 SCFH/330 LPM SPECIFICATIONS Inlet Pressure Minimum 105 PSIG Maximum 115 PSIG 7.23 Bar 7.92 Bar Outlet Pressure, Factory Set At No Flow 80 PSIG 5.5 Bar 20-700 SCFH 9.4-330 LPM Flow Rate Inlet Connection 1/4” NPT Outlet Connection 1/2” NPT Inlet Filters, Blender Protection Only PN: 8203 60 Micron Nominal Case Material 304 Stainless Steel Weight 17 lbs. / 7.
Welding Hose Twin Hoses for Acetylene & Oxygen IMPORTANT NOTE: Grade “R” welding hose is for use with acetylene only as specified by the RMA-CGA Hose Standard. “T” Grade hose must be used with all other gases. WARNING: Do not exceed the maximum working pressures (regulator setting) listed for the hoses during welding and cutting operations. Oxygen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 PSIG Maximum Acetylene . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Welding Hose Single Hoses For Acetylene IMPORTANT NOTE: The Grade “R” hose is for use with acetylene only as specified by the RMA-CGA Hose Standard. “T” Grade hose must be used with all other gases. SINGLE “R” GRADE HOSES FOR ACETYLENE ONLY RL121 Diameter Weight (lbs.) 12-1/2 ft. 3/16” (3.8m) (5mm) 1-1/4 (.55kg) Length Red Hose Connections Use With Torches 9/16”-18 LH (“B”) NE180 Handi-Heet R-GRADE Stock No. - I.D.
Fittings Hose Fittings LITTLE TORCH™ HOSE NUTS Stock No. Type Nut Thread & Number Hose ID Size R2 Oxygen 9/16”-18 RH 1/8” (3mm) R3 Fuel Gas 9/16”-18 LH 1/8” (3mm) R3 LITTLE TORCH™ HOSE TAILPIECE Stock No. 1882 Type Style Hose ID Size Oxygen/Fuel Barbed 1/8” (3mm) NOTE: For Oxy and Fuel Connections. 1882 HOSE ADAPTORS Stock No.
Accessories Flashback Arrestors FEATURES & BENEFITS: • Built-in check valve prevents the reverse flow of gas • Requires no manual reset • Easy to install - attaches to standard “B” fittings • High quality brass construction, case is rugged and corrosion resistant • Sintered stainless steel filter stops flashback fire • UL Listed Frequently asked questions about flashback arrestors: What is a flashback? A flashback is an ignition of mixed gases in an oxy-fuel cutting and welding system.
Accessories GASAVER™ - Save Money, Save Time & Improve Safety Ideal for production brazing and welding applications, Smith’s GASAVERS™ can help you realize huge savings by eliminating wasted gas during torch start-up / shut-down and between flame applications. Also saves time by eliminating repeated torch adjustment. The GASAVER™ gives you a safe place to temporarily put your torch and is used by America’s largest production plants. Torch flame is automatically extinguished when torch is not in use.
Accessories Repair Parts “O” RING REPLACEMENTS Stock No. Use with Welding/Heating Tips/Cutting Assemblies AW15 AW Series Welding Tips / AT Series Heating Tips / AC309 Cutting Assembly / NE180 Series Air-Acetylene Tips MW15 MW Series Welding Tips / MT Series Heating Tips / DG109A, MC509, MC505 & CC509P Cutting Assemblies LW15 SW Series Welding Tips / ST Series Heating Tips / DG209, DG205, DG200, SC209, SC205, SC200 Cutting Assemblies NOTE: 25 per package. HAND CUTTING TORCH REPAIR KITS Stock No.
Accessories Hard Hat™ Regulator Guards Protect regulators from costly gauge replacement with Smith’s Hard Hat™ gauge guards. Promotes safety . . . designed to help prevent broken gauges which can lead to gas leaks. Time and cost savings . . . helps prevent costly equipment down time and expensive repairs. HB190 Hard Hat™ is made from rugged steel. Bright yellow, baked enamel finish. Quickly and easily attaches to regulator. Fits: Series 40™, HB1500 and HB2100 series brass regulators.
Accessories Safety Training Materials SMITH SAFETY PACK Order Form #5145 w/DVD This kit includes: 30 - “37 Violations Safety Quiz” Brochures 30 - Safety Meeting Guides (in English, French & Spanish) 1 - 41 minute Oxy-Fuel Safety Video (see description and photos below) 1 Set Of 6 Smith Cartoon Safety Posters - 17-1/2" x 24" (see description and photos below) 1 Each post safety video test and answer key (may be duplicated) Smith literature and safety training materials may be ordered directly online, visit w
Merchandisers Smith Equipment Vinyl Banner Counter Mat Form No. 5236 Large Banner (24” x 72”) Form No. 5237 Small Banner (18” x 36”) Form No. 5269 This 2-color Smith Banner is perfect for indoor/outdoor displays. It has standard hems, ropes and grommets for sturdiness and easy hanging. Counter Mat dimension is 14” x 19”. (Adhesive backing) Smith Equipment Window Decal Form No. 5185 This 2-color Smith window decal is perfect for your vehicle or place of business. Hanging Sign Form No.
Merchandisers Pegboard Display Materials Kit Slatboard Display Materials Kit Part No. SM-2 Includes: Part No. SM-2SW Includes: 1 - Header Backdrop (No. 5254peg) 1 - Header Backdrop (No. 5254slat) 1 - Footer Backdrop (No. 5255peg) 1 - Footer Backdrop (No. 5255slat) 20 - Metal Hooks (No. 15135) 20 - Metal Hooks (No. 15135) 4” Literature Rack (No. 15831) 4” Literature Rack (No. 15831) 10 - Condensed Catalogs 10 - Condensed Catalogs (Form No. 4301) (Form No. 4301) Mounting Pins (No.
TRADEMARKS Trademarks are the property of the corporations listed: MAPP - Airco, Inc.; Flamex - Flamex Industries Inc.; Chem-O-Lene - Chemical Gas Products, Inc.