Operator`s manual

FOR YOUR SAFETY

Each stairway elevator is designed to travel down the stairway at a slightly slower speed

than is the case when travelling UP.

The footrest is equipped with obstruction sensors which stop the carriage if an obstacle is

encountered on the stairs.

If this should occur, press the opposite side of the UP/DOWN rocker control switch (on

the armrest) to run the carriage in the opposite direction. Clear the obstacle from the

stairway or rail then resume travel in the desired direction.

Your CRE-2110 is battery powered and will continue to operate for some time during a

power outage. The length of operation will depend on the battery condition, the length of

the stairs and the weight of the rider.

Only in the event of a prolonged power outage (more than one hour) will it be necessary

to turn the power off (circuit breaker switch on the carriage) and unplug the charger from

the wall outlet to conserve battery charge.

The power swivel seat option is equipped with current overload sensing to prevent

further seat swivel if a jam is detected.

The power footrest option is equipped with current overload sensing that will cause

the footrest to return to its last position if a jam is detected.