Installation guide



Wellav Technologies Ltd.
10
UMH 160 Quick Installation Guide
V1.1-W
5 6 8 9
PIC-4.2-1
Item No. Functionality
1
TS/IP: TS stream input and output as IP format
2
AES/EBU: Professional digital Audio output with XLR connector.
3
HDMI: Output high quality picture and sound with one cable.
4
Cr/Cb/Y: Component output.
5
VIDEO /AUDIO: Video signal output jack and Left/right audio output jack.
6
ASI IN: BNC connector for TS input.
7
CVBS OUT: Output video with BNC interface.
8
SDI OUT: Output the SDI Video stream.
9
ASI OUT: Output MPEG-2 or Mpeg-4 TS.
10
ETHERNET: The port is used in network remote control.
11
TUNER OUT (LOOP OUT): Use it when connecting to another IRD.
12
TUNER IN: Connect to a RF or IF signal.
13
POWER SUPPLY and POWER SWITCH: 90~250V AC, 50Hz.
Inrush Current at initial switch on: 1.55A. Inrush Current after power supply
interruption: 2.3A.
5. Installation Instruction
5.1 Mounting unit to a 19” rack
When selecting the installation site, try to comply with the following:
1 2 3 47
12 910 11813