Installation guide



Wellav Technologies Ltd.
12
UMH 160 Quick Installation Guide
V1.1-W
PIC-5.1-2
5.2 Wiring Connection
Before setting up the connection, please turn off the equipment and all other
connected external devices. The equipment and all connected external devices are
required grounded. Turn on the devices only after the wiring connection is completed.
Otherwise, the device may be damaged.
Follow the below connection diagram to set up cable connection:
PIC-5.2-1
z Set up cable connection for input signal: either the RF input or ASI input.
z Set up cable connection for output signal: either through ASI or HDMI/ CVBS/SDI.
z Set up connection for network management control.
In order to ensure a smooth communication between the management PC and
1
2
5
4
3