Installation guide



Wellav Technologies Ltd.
20
UMH 160 Quick Installation Guide
V1.1-W
PIC-6-3-4
z SATELLITE FREQUENCY (MHz): this is the satellite down conversion
frequency, every transponder has one frequency, and this parameter can be
obtain from the satellite program provider or at www.lyngsat.com
z SYMBOL RATE (KBaud): every transponder has one symbol rate; this
parameter can be obtain from the satellite program provider or at
www.lyngsat.com
z LNB LO. Frequency: this is the LNB’s local oscillation (LO) frequency,
every LNB have one or two oscillation frequencies that can be obtained from
the LNB provider, or you can check on the LNB label. The value is between
5000 and 6000..
-Step three
By changing the CAM operation, you can determine whether to descramble the program or
not.
o BYPASS:to transmit the program without any disposal.
o CI SLOT 1 / CI SLOT 2:Common Interface slot. If the program is scrambled, you
can appoint the CAM module with CAM Card to scramble it. Under this condition,
the program is transmitted in default.
o DELETE: any program you don’t want to transmit can be forbidden by selecting
this status.