Installation guide



Wellav Technologies Ltd.
21
UMH 160 Quick Installation Guide
V1.1-W
-Step four
After that press the “Submit” button to save your settings, and click “Refresh” button to
refresh the screen to check if the signal is locked.
z ASI IN
PIC-6-3-5
-Step one
When choosing the ASI signal as input, check the ASI siganl first to ensure a high-quality
source, then connect the ASI signal to the ASI interface on rear panel.
-Step two
By changing the CAM operation, you can determine whether to descramble the program or
not.
o BYPASS:to transmit the program without any disposal.
o CI SLOT 1 / CI SLOT 2:Common Interface slot. If the program is scrambled, you
can appoint the CAM module with CAM Card to scramble it. Under this condition,
the program is transmitted in default.
o DELETE: any program you don’t want to transmit can be forbidden by selecting
this status.
-Step three
Choose the ASI signal as signal source and click “submit” button to confirm. After that click
“refresh” button to refrsh the status page to check if the signal is locked.
Stepthree
StepOne
Steptwo