Installation guide



Wellav Technologies Ltd.

UMH 160 Quick Installation Guide

V1.1-W

1) The IRD supports IGMP v3, please note the IGMP version that your router supports.

2) The ‘Speed Mode’ in front panel should be set the same to your switch/router.

3) The quantity of programs transmitted via IP channel depends on the speed mode

(10M/100M/1000M) of the switch or router, which connects to the IRD. The total bitrates you

want to transmit should less than the most speed which the switch or router takes, otherwise,

the quality of programs will decrease, even the programs cannot be transmitted through

switch or router.

z unicast application

The unicast involves two local area networks connecting each other via Internet. Compare

with multicast, the connection and parameter setting of unicast are a little complicated. The

following picture shows a typical connection and parameter setting for unicast application.

You need set the parameters listed in this picture.

PIC-6-3-16

6.3.4 Change the password

Choose “User management” menu and you will get the operation interface. Select the

username and input the old password correctly, then you are able to change the password.

After inputting the new password, please click submit button to enforce the configuration.