Soldering Tools, Accessories, Insulated Screwdriver and Pliers
Weller ® Table of Contents Contents Page No.
SOLDERING STATIONS & ACCESSORIES Temperature Controlled Soldering Stations • Ideal for all soldering applications that do not need a high-end station but to be done professionally. • Designed for use in repair, service and ambitions hobby, especially for RC moduls. • Touch screen technology. • Heat-up time 15 sec. • Integrated micro soldering pencil 40W, with ergonomic design. • Built-in Stop+Go function for energy efficient switch off.
SOLDERING STATIONS & ACCESSORIES Tips and Accessories for Soldering Stations WHS M & WHS MC • High efficient soldering tips with integrated heating element • Blister packet Diameter mm Width mm Shelf Pack Type Code No. Description RT 2 T0054460289 Pointed RT 3 T0054460389 Chisel shaped straight 1,3 x 0,4 1 RT 5 T0054460589 Chisel shaped bent 0,8 x 0,4 1 RT 8 T0054460889 Chisel shaped straight 2,2 x 0,6 1 0,8 1 • Car Adapter 12 V Code No.
SOLDERING STATIONS & ACCESSORIES Temperature Controlled Soldering Stations • The temperature range can be controlled between 200°C and 450°C. The WHS40 soldering station from Weller rules out the risk of temperature shocks which can occur with conventional soldering bits. • Desired temperatures can be set precisely in such a way that you no longer have to worry about overheating sensitive areas. • Consist of power unit, soldering iron with nickel-plated tip 2,0 mm and support.
SOLDERING GUNS & ACCESSORIES Expert Soldering Guns • Red housing with built-in illumination of the solder-joint and cooper soldering tip. • All purpose gun, that tackles soldering, cutting, sealing and pokerwork with instant heat trough interchangeable tips. • Operated by fingertip trigger this gun is ready to solder in 7 seconds. • 8100 UCK/UDK/UCPK contain 8100 Expert soldering gun, coil of multi-purpose solder, cutting tip, smoothing tip and a soldering aid tool.
SOLDERING GUNS & ACCESSORIES Standard UC3 Soldering Gun • Housing in ocean blue with copper soldering tip in triangular packaging, not including accessories. Type Code No. 9200UC3 T0050208499 Watts Volts Hz Weight g Shelf Pack 100 230 50 1080 12 Robust Soldering Guns • Yellow housing with built-in solder-joint illumination. • Professional heavy-duty gun with iron-plated Longlife soldering tip. Type Code No.
SOLDERING GUNS & ACCESSORIES Tips for Expert Soldering Gun 8100 7135 6110 Type Code No. Description Shelf Pack 7135 T0054000299 Copper soldering tip (2 on card) 12 6110 T0054000199 Cutting tip 12 6120 T0054000399 Smoothing tip 12 PL-1 T0054001299 Sealing tip & Teflon tape (for sealing plastic) 12 01101 T0054001499 Sealing tip (for plastic) 12 RCT RCT Rope cutting tip 12 Tips for Standard Soldering Gun 9200 6120 RCT Type Code No.
SOLDERING IRONS & ACCESSORIES , SP + SI SERIES Soldering Irons, SP Series Fine Duty Irons, 15 Watts • For fine duty work such as in home electronics, light duty electrical repairs and hobby work. • Fitted with straight tip, nickel-plated 2,0 mm (type S5). • ON / OFF indicator light Type / Code No.
SOLDERING IRONS & ACCESSORIES , SP + SI SERIES Heavy Duty Irons, 80 Watts • Heavy duty iron for making metal repairs, such as battery connections and small metal joining tasks. • Fitted with straight tip, iron-plated, “Longlife” 9,5 mm (type MTG20). • ON / OFF indicator light Type / Code No.
SOLDERING TIPS , SP + SI SERIES Soldering Tips, Nickel-Plated, Packed on Card For Soldering Iron Type Code No. Description SP15L / SI15 S5 T0054313199 S3 MT1 SP25L SP40L / SI40 Diameter mm Width mm Shelf Pack straight, 3 pcs. 3,5 2,0 6 T0054003499 straight, 3 pcs. 3,5 3,5 6 T0054313299 straight, 3 pcs. 4,5 0,8 6 MT2 T0054313399 straight, 3 pcs. 4,5 4,0 6 MT6 T0054313499 smoothing tip, 1 pc. 4,5 10,0 6 HK11 T0054313599 hot knife, 1 pc.
REPLACEMENT PARTS , SI SERIES Replacement Parts for Soldering Irons For Soldering Iron Type Code No.
SOLDERING IRONS & ACCESSORIES , SERIES MINI 2000 Soldering Irons, Series Mini 2000 • Specifically designed for the electronic hobbyist. • Lightweight iron, perfectly balanced, with an ergonomically designed handle. • Available in 12, 15 and 20 Watts plus a 12 Volt version with 15 Watts for connecting to a car battery.
SOLDERING IRONS & ACCESSORIES High Performance Soldering Iron WPS18MP • High performance soldering iron. • Outstanding performance patented power supply design. • Heats up to 480°C in just 35 seconds, 3 times faster than a regular 60-Watts iron. • Red power-on LED changes to green when iron reaches the working temperature. • Tip is elevated when tool is placed flat on work surface-no stand is needed. • Modular plug for easy tip exchange. • Bright LED illuminates solder joints.
SOLDERING IRONS & ACCESSORIES Soldering Tips for WPS18MP • Soldering tip with integrated heating element and modular plug WPS10EU WPS11EU Type / Code No.
SUPPORTS FOR SOLDERING IRONS & PCB HOLDER Support KH15 Weight g Shelf Pack For soldering irons, series Mini 2000 425 1 For soldering station WHS M + WHS MC 460 1 Weight g Shelf Pack 20 1 Weight g Shelf Pack Type Code No. Description KH15 T0051502199 KH16 T0051516599 Support AH1 Type Code No. Description AH1 T0051239800 For soldering irons up to 75 Watts, Hobbykit 1 & 2 and Series Mini 2000 Support AH2/AH3 196 Type Code No.
SUPPORTS FOR SOLDERING IRONS & PCB HOLDER Support KH30 Type Code No. Description KH30 T0051504099 For soldering irons up to 100 Watts, Weight g Shelf Pack 620 1 Hobbykit 1 and 2 PCB Holder • Maximum mounting surface of 160 x 235 mm. • PCBʼs and components can be rotated through 360° at increments of 15°. • Work-piece is held in place by spring clamps. • Side pieces are adjustable along a continuum. Hexagonal socket screws hold in place. • Built-in, non-slip rubber feet.
SOLDER ACCESSORIES Solder, Lead Free, EL99/1 • “Lead free” solder S-Sn99Cu1, DIN EN 29453 (Sn99,3Cu0,7). 2,2% resin DIN EN 29454, 1.1.2.B (EN 6190-ROM1) Type Code No. Description Packed Shelf Pack EL99/1-25 T0054025099 Lead free solder 25 g, Ø 1,0 mm Carded 6 EL99/1-100 T0054025199 Lead free solder 100 g, Ø 1,0 mm Carded 6 EL99/1-250 T0054025299 Lead free solder 250 g, Ø 1,0 mm Carded 6 Solder BL50/50-100 Type Code No.
SOLDER ACCESSORIES Soldering Grease LF 25 Type Code No. Description Packed Shelf Pack LF 25 T0054002699 Soldering grease, 20 g. Carded 6 For tin plating of cooper, brass or sheet steel DIN EN 29454-1 / 3.1.1.C Solder Solution LW 25 Type Code No. Description Packed Shelf Pack LW 25 T0054002799 Solder solution, approx. 25 ml. Carded 6 DIN EN 29454-1 / 3.1.1.
SOLDER ACCESSORIES Stone salmiak LS 25 Type Code No. Description Packed Shelf Pack LS 25 T0054002899 Cleaning stone for soldering tips. Carded 6 Stone salmiak, approx. 70 g 65 x 45 x 20 mm, Ammonium chloride Solder BL 50/50-250 Type Code No. Description Packed Shelf Pack BL 50/50-250 T0054004399 Solder, 250 g, Ø 1,5 mm Carded 6 S-Sn50Pb49Cu1 DIN EN 29454-1, 1.1.2B Solder RL 60/40-250 Type Code No.
SOLDER ACCESSORIES Electronic Solder L 60/40-25 Type Code No. Description Packed Shelf Pack L 60/40-25 T0054002999 Solder with resin-core, 25 g, Ø 1 mm on reel Carded 6 S-Sn60Pb38Cu2 DIN EN 29454-1, 1.1.2B Electronic Solder EL 60/40-100 Type Code No. Description Packed Shelf Pack EL 60/40-100 T0054004599 Electronic solder with resin-core, 100 g, Ø 1 mm Carded 6 S-Sn60Pb38Cu2 DIN EN 29454-1, 1.1.2B Tiffany Solder TL 60/40-100 Type Code No.
SOLDER ACCESSORIES Solder Assortment WLS 20-65 Type Code No. Description Packed Shelf Pack WLS 20-65 T0054009499 Solder assortment for hobbyists Carded 6 1 Solder Wire, 20 g, Ø 1,5 mm S-Pb70Sn30, DIN EN 29453 1 Stone 65 x 45 x 20 mm, Ammonium chloride 1 Solder solution 25 ml, DIN EN 29453, 3.1.1.A 1 Solder grease 20 g, DIN EN29454, 3.1.1A Solder Rods WLS 30 Type Code No.
OTHER ACCESSORIES & BATTERY POWERED SOLDERING IRON Other Accessories DSP11 Type Code No. Description Packed Shelf Pack EL1 T0054006599 Desoldering wire, width 1,5 mm Carded 6 EL2 T0054006699 Desoldering wire, width 2,2 mm Carded 6 DSP11 T0054011099 Desoldering pump Carded 6 WS1 T0054007599 “Strippi” Wire Stripper Carded 6 SW1 T0054006799 Sponge for all KH supports Carded 6 22420 T0052242099 Sponge, 5 pcs.
BATTERY POWERED SOLDERING IRON Dual Powered Battery Soldering Iron AA 1,5V • Dual power, 8 watts on level I (450°C) and 11 watts on level II (510°C). Green LED for level I, red LED for level II. • Heats up to working temperature in 15 seconds. • Storage cap with auto power shut-off. • For multi use...
CORDLESS SOLDERING IRONS & ACCESSORIES Cordless Soldering Irons, 15 Watts • • • • • • • Heats up to approx. 370°C in 6 seconds. Fingertip control with safety-lock switch. “Longlife” nickel cadmium batteries fully charged overnight. Interchangeable tips Built-in work light Slim, lightweight balanced design Packed in coloured carton consisting of soldering iron complete with tip WC 112 and battery charger. Type Code No.
CORDLESS SOLDERING IRONS & ACCESSORIES Soldering Tips for WP2 Pyropen Jr. 71-01-01 • “Longlife” soldering tips with catalyst. • All tips are packed on card. 71-01-02 71-01-03 71-01-04 Width mm Shelf Pack Tapered needle 0,5 6 T0051616699 Chisel point 3,0 6 T0051616799 Spade point 3,0 6 T0051616199 Chisel point 5,0 6 Type Code No. Description 71-01-01 T0051616599 71-01-02 71-01-03 71-01-04 Hot Air Tips for WP2 Pyropen Jr. 71-01-50 • “Longlife” hot air tips with catalyst.
CORDLESS SOLDERING IRONS & ACCESSORIES Butane Gas Operated Soldering Iron WP1 with Piezo Ignition • This soldering iron, operated using butane gas, has infinitely variable temperature control. • Recharged in seconds • Easy-to-handle, requires no power cord or batteries and is electronically completely neutral (no peaks). • “Longlife” soldering tips deliver quick heat-up time. • It can also be used as a hot air unit for shrinking plastic.
CORDLESS SOLDERING IRONS & ACCESSORIES Butane Gas Operated Soldering Iron Weller / Portasol WC1 • Operated using butane gas. • Refillable and can be used anywhere. • Consist of gas soldering iron with tip C2 and closure cap with built-in spark lighter. Type Code No. Description WC1 T0051608099 Gas soldering iron Weight g Shelf Pack 85 6 Width mm Shelf Pack Soldering Tips for WC1 • All tips with catalyst. • Packed on card. C2 C3 C4 208 Type Code No.
CORDLESS SOLDERING IRONS & ACCESSORIES Butane Gas Operated Soldering Iron Kit Weller / Portasol P1K • This gas soldering kit has four tools in one: soldering tip, flame nozzle, hot air nozzle and hot cutting knife. • Operated using butane gas. • Refillable and can be used anywhere. • Approx.
CORDLESS SOLDERING IRONS & ACCESSORIES Butane Gas Operated Soldering Iron WP4 with Piezo Ignition • This soldering iron, operated using butane gas has infinitely variable temperature control. • Recharged in seconds. Gas container capacity 63 m.l • Easy-to-handle, requires no power cord or batteries and is electrically completely neutral (no peaks). • Approx.
CORDLESS SOLDERING IRONS & ACCESSORIES Butane Gas Operated Soldering Iron Set WP3EU with Piezo Ignition • Three functions: soldering, hot air and open flame • Operating time 30 min. (80% filling) • Max. temperature: soldering tip and hot air nozzle up to 450°C, open flame up to 1300°C • Set consists of gas soldering iron, 3 soldering tips (conical 1,0 mm and 2,4 mm, chisel shaped 2,4 mm), “Hot knife”, heat shrinking tip, Solder lead free ø 1,0 mm, 15 g cleaning sponge, wrench for changing , storage case.
HOBBYKITS FOR POKERWORK AND STAINED GLASS & ACCESSORIES Hobbykit 1 for Pokerwork, 25 Watts • Specially designed for wood, cork, leather burning and candle sculpting. • Consist of hobby iron, straight tip 0,8 mm and sloped tip 50° / 4,0 mm, tool support and operating instruction.
HOBBYKITS FOR POKERWORK AND STAINED GLASS & ACCESSORIES Woodburning and Hobbykit WHK30, 30 Watts • Woodburning and Hobby Kit, 15 Piece. • Decorative woodburning projects by using patterns from the enclosed project booklet which includes instructions for the use of each tip and techniques for achieving best results. • Sculpting and embossing wax candle.
HOBBYKITS FOR POKERWORK AND STAINED GLASS & ACCESSORIES Hobbykit 2 Stained Glass Soldering Iron, 80 Watts • A safe hobby iron designed for decorative glass work (Tiffany) around the house, such as lamp shades and glass pictures. • Consist of hobby iron with tip SG10, tool support and operating instruction. • ON / OFF indicator light Type / Code No.
SOLDERING IRONS FOR STAINED GLASS & ACCESSORIES Temperature Controlled Stained Glass Iron, 100 Watts • Temperature controlled stained glass iron made to the highest professional standards. • Temperature is controlled according to the Weller ® Magnastat Principle. • The Weller ® soldering irons with automatic temperature control guarantee an outstanding heat supply and restrict the energy supply when the tool idles. • Working temperature: approx. 340°C • Idle temperature: approx.
SOLDERING IRONS FOR STAINED GLASS & ACCESSORIES Temperature Controlled Stained Glass Iron, 200 Watts • Temperature controlled stained glass iron made to the highest professional standards. • Temperature is controlled according to the Weller ® Magnastat Principle. • The Weller ® soldering irons with automatic temperature control guarantee an outstanding heat supply and restrict the energy supply when the tool idles. • Working temperature: approx. 290°C • Idle temperature: approx.
SOLDERING IRONS FOR STAINED GLASS & ACCESSORIES Soldering Station for Stained Glass, 80 Watts • • • • • • • • Soldering station 80W with soldering iron 80W, 24V. Ideal for Tiffany/Stained glass work. Analogic controlled electronic for soldering tool up to 80W. Temperature control via rotary potentiometer. Temperature range 150°C - 450°C. Automatic tool recognition. Protection class I. Consits of: Control unit P81, Soldering iron LR82, with soldering tip SG83 (sloped 35°, ø 7,4mm) and Safety rest KH27.
COMPACT SMOKE ABSORBER Benchtop Smoke Absorber WSA350 • • • • Removes much of the noxouis solder flux fume from workplace Quit fan, sound level 45-50 dB(A) Absorption capacity: 1,25m3/min Activated Carbon filters, 3 filters included. Specifications: • Activated carbon contend per filter: 9g • Max. capacity for noxious component per filter: 2,5g • Size of filter: 130 x 130 x 10mm Type / Code No.
SCREWDRIVERS AND PLIERS , 1000 VOLTS INSULATED Screwdrivers, 1000 Volts Insulated • • • • Insulated according Norm 1000 V 10 IEC 60900: 2004 VDE / GS certificated Co-molded handles for maximum comfort Blades made of 8660 steel PH210 Phillips® Type / Code No.
SCREWDRIVERS AND PLIERS , 1000 VOLTS INSULATED Pliers, 1000 Volts Insulated • Insulated according Norm 1000 V 10 IEC 60900: 2004 • VDE / GS certificated • Co-molded handles for maximum comfort 220 Length mm Weight g Shelf Pack Combination Pliers 180 301 6 HLCP180 High Leverage Combination Pliers 180 325 6 DCN160 Diagonal Cutting Nipper 160 243 6 HLDCN160 High Leverage Diagonal Cutting Nipper 160 256 6 LNP200 Long Nose Pliers 200 241 6 WS160 Wire Stripper 160 224 6 TGP250
