Data Sheet

ManualsBrandsWeller Erem® ManualsDIY & ToolsESD Side cutter 110 mm

PROFESSIONAL

Product Information

632NCF

Product no.: 632NCF

Side cutter – straight thin relieved head. Razor cut, for soft

material only

source images

Highly precise work on SMD and micro-package

contacts up to 0.25 mm/0.010 inches

Side cutter, suitable for precision cuts on soft materials,

e.g. small silicone tubes in medical applications,

precision connector seals, miniature rubber seals, soft

synthetic parts.

For soft material only

The Perfect Cut - Strong, sharp and precise, every time

The Weller Erem Series 600 Micro is a range of miniature precision cutters that offers a wide variety of head shapes for access in difficult to reach areas. These micro cutters are

suitable for SMD and leads (670EP, 670EPF). The cutters are made from high grade tool steel with cutting edges hardened to 63-65HRc. The precision cutters have a nonreflecting

surface, are ESD safe and resharpenable.

Swiss

Made

PRECISION

TOOLS

Summary of content (2 pages)

PAGE 1
PROFESSIONAL Product Information 632NCF Product no.: 632NCF Side cutter – straight thin relieved head. Razor cut, for soft material only Highly precise work on SMD and micro-package contacts up to 0.25 mm/0.010 inches Side cutter, suitable for precision cuts on soft materials, e.g. small silicone tubes in medical applications, precision connector seals, miniature rubber seals, soft synthetic parts.
PAGE 2
PROFESSIONAL Product Information Technical Data Length mm 110 Length of cutting edges mm 9 Head width mm 9 Head thickness mm 6 Head length mm 15 Max. cutting capability – hard wire mm Weight in oz --1.69 Length of cutting edges Inches 0.354 Head width Inches 0.354 Head thickness Inches 0.236 Head length Inches 0.590 ESD-safe on Cut Super full flush Max. cutting capability – medium hardness mm Max.