Datasheet

Produkt Informationen
WDC 2 Dry cleaner set
Bestellnummer : T0051512799
Cleaning Kit WDC2, Tip Activator⁄ Stainless steel brush
When using lead free you will be experienced an increased in oxidation in the wettab
le area of the tip. These oxides
must be removed regularly otherwise it will make the tip completely unwettable and n
ot usable anymore. When
cleaning the tip by means of the Weller WDC Dry Cleaner a special brass wool is used
. The final cleaning is then done by pushing and turning the tip in the brass wool.
After cleaning there is still a fine amount of solder on the tip avoiding fast oxida
tion
of the iron layer which is an advantage versus the cleaning by the wet sponge. The b
rass wool can be soaked in flux
which may improve the performance further. More informations for cleaning you can fi
nd on page 154/155.
Why dry cleaning?
Best cleaning effect
Soldering tip will be cleaned but stays wetted
Flux will be removed
Safe from oxidation
Less temperature shock
Dry cleaning with WDC 2
Best treatment for soldering tips
No-clean flux
Minimistation of the erosion
Percentage of flux: 3,5%
Double soldering tip lifetime
Superior wetting properties
Reduced spring effect - less solder splashes
page 1 / 1