WDH 10T / WDH 20T Operating Instructions 1-7 Equipment Overview Connection Instructions: 1 Switching Tool Stand 2 Sponge 3 Switching Tool Stand Plug 4 Down Scroll Key 5 Up Scroll Key 6 Receptacle 120 VAC 7 Power Switch 8 Soldering Iron Plug 9 Soldering iron
-7 WDH 10T / WDH 20T Thank you for placing your trust in our company by purchasing the Weller WDH 10T / WDH 20T Switching Tool Stand. This product meets or exceeds the requirements established by Weller for superior performance, versatility and quality. 1. Cautions! / Warnings! Please read these Operating Instructions and the attached Safety Information carefully prior to initial operation. Failure to observe the safety warnings may result in accident, injury, or risk to health.
WDH 10T / WDH 20T 3-7 − observance of the locally applicable accident prevention regulations. The manufacturer shall not be liable for damage resulting from unauthorized alterations to the device. 2 Description The Weller WDH 10T / WDH 20T Switching Tool Stand, as opposed to a standard Tool Stand, provides a switching function that is activated by the soldering station. A microswitch integrated in the Switching Tool Stand is actuated when the soldering tool is placed in the holder or removed.
-7 WDH 10T / WDH 20T 4. Place the soldering iron (9) in the Switching Tool Stand (1) and insert the soldering iron 7-pin plug (8) into the Switching Tool Stand receptacle and lock it by turning clockwise slightly. 5. Switch on the soldering station (7). 4 Operating Guidelines 4.
WDH 10T / WDH 20T Note 5-7 Observe the Operating Instructions of your control unit when setting and switching the SETBACK and AUTO-OFF functions on and off. 4.2 Switching valve control with Switching Tool Stand on/off (WAD101) When operating a soldering iron with inert gas and when using the Switching Tool Stand, the valve control must be set at the WAD 101 control unit. Two switching conditions are possible: − A-1: the valve control is switched on.
-7 WDH 10T / WDH 20T 7 Accessories Dry cleaning insert WDC 2, 0051512599 Spiral wool, 0051382599 8 Packing List WDH 10T − 0051516199 Switching Tool Stand WDH 10T − Operating Instructions WDH 10T / WDH 20T WDH 20T − 0051516299 Switching Tool Stand WDH 20T − Operating Instructions WDH 10T / WDH 20T 9 Disposal Dispose of replaced equipment parts, filters or old devices in accordance with the rules and regulations applicable in your country.
WDH 10T / WDH 20T 7-7 Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state. www.Cooperhandtools.