Weller Rework Systems Perfect Performance
APPLICATION FLEXIBILITY. PRODUCTIVITY. PROCESS CONTROL. WR3M ESD Application flexibility.
Productivity.
WR3M 1 2 3 4 5 6 7 8 Maximum power supply 400W Active Tip WMRPMS RTMS Soldering tips Order number: T0052919299 WMRTMS RTWMS Tips Order number: T0051317599 Accessory Power-Response WP65 XNT tips Order number: T0052921599 WP120 XT tips Order number: T0052919399 WP200 XHT tips Order number: T0052919999 Standard-Line WTA50 WTA Tips Order number: T0051317199 Silver-Line WP80/WSP80 LT Soldering tips Order number: T0052918099 (WP80) Order number: WSP80 (WSP80) WVP Order number: T0052918499 Accesso
WR3ME WR2 1 2 3 4 5 6 7 Maximum power supply 400W Desoldering Iron DXV80 DX Tiplets Order number: T0051318099 Tip Extraction Iron FE75 LT Soldering tips Order number: T0052916699 DSX80 DX Tiplets Order number: T0051319099 2 3 4 5 7 Maximum power supply 300W Hot Air Iron HAP200 HAP hot air nozzles Order number: T0052711699 HAP1 HAP Hot air Tiplets Order number: T0052711899 DSX120 XDS/XDSL Tiplets Order number: T0051319899 Preheating Plate WHP80 Order number: T0052702899 24v/80 watts Solder Bath
WR3M TECHNICAL DATA Dimension L x W x H WR3ME WR2 273 x 235 x 102 mm (10.75 x 9.25 x 4.02 in) Weight: 6.7 kg (14.77 lbs) 6.7 kg (14.77 lbs) 6.3 kg (13.9 lbs) Channels 3 3 2 Wattage 400W 400W 300W Power supply 120V, 60Hz Fuse T500 mA (120V / 50/60 Hz) Fuse: overcurrent release 2A 2A 1.
WR5000M 700 watts of power over 5 independently-controlled channels 2 Specified tips included Application flexibility with up to 19 tool options (WR3ME only) 1 PC Connectivity and data logging software included (WR3ME only) Note: Not applicable with WRK kit or WVP vacuum 4 12 10 6 9 8 3 5 11 1 2 3 4 5 Order Number WR5000M WR3ME WR2 T0052921599 T0051512199 T0054485199 T0052919299 6 T0051515699 T0054460373 7 T0051319899 8 T0051515299 T0051325099 9 T0051317599 Model Number WR5000M WR3ME WR2 WP65 W
WR3000MER 400 watts of power over 3 independently-controlled channels Specified tips included Application flexibility with up to 19 tool options 1 3 5 7 PC Connectivity and data logging software included 6 Note: Not compatible with WRK kit or WVP vacuum pencil.
WR3000SA 400 watts of power over 3 independently-controlled channels Specified tips included 1 Application flexibility with up to 19 tool options 6 PC Connectivity and data logging software included 1 2 3 4 5 6 7 4 2 Note: Not compatible with WRK kit or WVP vacuum pencil.
WR3000SS 400 watts of power over 3 independently-controlled channels Specified tips included 1 Application flexibility with up to 19 tool options 7 5 3 4 PC Connectivity and data logging software included 6 2 Note: Not compatible with WRK kit or WVP vacuum pencil.
WR2000ER 6 300 watts of power over 2 independently-controlled channels Specified tips included 1 Application flexibility with up to 15 tool options Note: Not compatible with micro tools, WMRP/WMRPMS, WMRT/WMRTMS or HAP200, WVP, WRK tools 1 2 3 4 5 Order Number WR2000ER WR2 T0052921599 T0051512199 T0054485199 T0051319899 T0051515299 T0051325099 Model Number WR2000ER WR2 WP65 WDH10 XNTA DSX120 WDH30 XDS1 5 3 4 2 Description WR2 multi-channel, desoldering, soldering rework system Power unit, 300w, 1
WR2000 300 watts of power over 2 independently-controlled channels Specified tips included Application flexibility with up to 15 tool options Note: Not compatible with micro tools, WMRP/WMRPMS, WMRT/WMRTMS, or HAP200, WVP, WRK tools Order Number WR2000 1 WR2 2 T0052711899 T0058727821 Model Number WR2000 WR2 HAP1 R04 2 1 Description WR2 multi-channel, hot air rework system Power unit, 300w, 120v Hot air set w/WDH30 safety rest Hot air nozzle for HAP1 Total tool power Power 300W 100W 100W WR2000X 300 wa
WMRP /WMRP-MS 55W Max, 12V Ideal for microscope work; highest performance via active soldering tip; cartridge type tip.
CONICAL Øa mm Order number Type Øa mm Order number RT 1 0.2 T0054460199 RT 1MS 0.2 T0054461499 RT 1NW* 0.1 T0054462599 RT 1NWMS* 0.1 T0054462571 RT 2 0.8 T0054460299 RT 2MS 0.8 T0054461799 RT 15 .75 T0054460271 RT 12MS 25° 0.5 T0054463299 RT 14 0.4 T0054460171 RT 13MS 30° 0.4 T0054463399 RT 14MS 0.4 T0054460173 RT 15MS .75 T0054460273 Type a GULL WING RT RT-MS Type Øa mm b mm Order number Type Øa mm b mm Order number RT10GW 1.2 2.
WMRT/WMRT-MS 2 x 40W, 12V Ultra slim tweezers; ideal for soldering and desoldering very small SMD components; cartridge type tips.
WP65 65W, 24V Perfect choice where Active-Tip above lacks sufficient power; lower cost, non-cartridge style tips. WP65 Maximum power and rapid response T0052921599 Pencil, XNTA tip Optimized sensor position Energy saving performance WP65SET WP65 pencil with WDH10 stand T0052921699 CHISEL a c XNT Øa mm b mm c Order number mm Type Øa mm b mm c Order number mm XNT 1SCNW* 0.3 0.1 27.0 T0054488199 XNT C 3.2 0.8 27.0 T0054485899 XNT 1SC 0.4 0.15 27.0 T0054486299 XNT D 4.0 0.8 28.
CONICAL a KNIFE c b Order number Type Øa mm c mm Order number XNT 1 0.5 27.0 T0054485099 XNT S 0.4 37.5 T0054486899 XNT 1L 0.2 42.8 T0054487199 Type Øa mm c mm Order number XNT KN 2.0 33.0 T0054486399 Type b mm c mm Order number Type b mm c mm Order number XNT GW 45° 2.0 33.0 T0054485499 XNT GW 1 45° 1.5 27.5 T0054488099 Type Øa mm c mm Order number Type Øa mm c mm Order number XNT 1S 0.2 28.5 T0054485299 XNT M 3.2 37.5 T0054486799 XNT AS 1.
WSP80/WP80 80W, 24V Universal SMD and THT applications both small and large; lowest cost, non-cartridge style tips in entire range. Effective heat transfer via best material silver core WSP80 WP80 MPR80SET Fast ramp up and recovery Designed for universal applications WSP80 T0052918099 T0053313199 Pencil, LTB tip Pencil, LTB tip Pencil, LTH tip, KH25P stand WP80SET WP80 pencil, LTB tip, WDH stand T0052918199 CHISEL a c b ROUND c Øa mm b mm Type Øa mm b mm c Order number mm LT 1SC 0.4 0.
KNIFE c a SLOPED c a CONICAL a GULL WING b c Øa mm c mm Order number LT KN 2.0 16.5 LTKN LT KNSL 45° 2.0 16.5 T0054451999 Type a mm c mm Order number Type a mm c mm Order number LT 4 45° 1.2 15.0 T0054443999 LT DD 45° 4.0 20.0 T0054447899 LT F 45° 1.2 12.5 LTF LT DD 45° A 4.6 17.0 T0054448699 LT AA 60° 1.6 12.5 T0054448799 LT 11CP 45° 1.2 15.0 T0054442171 LT BB 60° 2.4 17.0 T0054444499 LT 22CP 45° 2.0 20.0 T0054440873 LT BB 45° 2.4 17.
WP120 120W, 24V 120-watt, highest-standard performance iron; perfect choice, lower cost, non-cartridge style tips. WP120 Highest power and rapid response T0052919399 Pencil, XTB tip Optimized sensor position Meeting highest industry standards CHISEL c Øa mm b mm c Order number mm Type Øa mm b mm c Order number mm XT H 0.8 0.4 36.5 T0054471399 XT D 4.6 0.8 34.5 T0054470699 XT A 1.6 0.7 36.5 T0054470399 XT CSL 3.2 0.45 36.0 T0054474299 XT AL 1.6 1.0 39.5 T0054470199 XT E 5.
GULL WING Type b c a XT Øa b c mm mm mm Order number XT GW1 45° 2.3 3.2 36.5 T0054471299 XT GW2 45° 3.5 4.8 36.5 T0054473599 Type Øa b c mm mm mm XT GW3 45° 0.8 0.9 Order number 41.5 T0054473999 SMT BLADE STYLE KNIFE CONICAL c Type Øa mm c mm Order number XT KN 60 ° 2.0 45.0 T0054471199 Type Øa mm c mm Order number XT O 1.0 36.
WMP Short tip-to-grip 65 watt pencil provides fast heat-up and good thermal recovery 37mm / 1.46“ Built-in heating element 65W, 24V WMP TWMP Pencil, NT1 tip WMPSET T0052917999 WMP pencil, NT1 tip, WDH20 stand NT SERIES TIPS A B Type Catalog number in mm Micro NT1 0.010 Micro NT1S Bent Round in mm 0.25 0.291 7.40 0.010 0.25 0.333 8.45 NT1X 0.016 0.40 0.321 8.15 Round NT4 0.047 1.20 0.390 9.90 Chisel NT6 0.063 1.60 0.016 0.40 0.372 9.45 NTA 0.063 1.60 0.
WTA50 Dual heating elements & independent sensors provide uniform temperature Desoldering tweezers for SMD components. The tips are attached via set screws 2 x 25W, 24V WTA50 WTA50SET T0051317199 T0053313399 Tweezer, WTA1 tips WTA50, WTA1 tips, AK51 stand THERMAL TWEEZER TIPS WTA series tiplets for WTA50 thermal tweezers tinned with lead-free solder A A Catalog number Order number in mm WTA1 T0054414199 0.039 1.00 WTA2 T0054414699 0.118 WTA3 T0054414799 3.
DSX120 DESOLDERING IRON 35-second heat up time Ideal for professional rework applications.
XDSL SERIES DESOLDERING TIPLETS For use with the DSX120 desoldering iron.
HAP1/HAP200 HOT AIR PENCILS Finger-activated hot air switch Precisely delivers hot air to SMD components.
RESOURCES FOR THE FUTURE. Weller is a committed supporter of actions that help to protect our environment and to conserve natural resources. By recycling the copper and iron from used tips, we can make a real contribution towards helping the environment. Collect your worn out soldering tips, all types from all manufacturers, send them to us, and we will arrange for their environmentally safe recycling. Not only will your effort benefit the environment but it will also benefit you because for every 2 lbs.
ACCESSORIES WDC DRY CLEANER WDC2 DRY CLEANER LEAD FREE TIP ACTIVATOR Order number: T0051512499 Soft solution for cleaning lead-free solder with brass wool. Replacement wools: T0051384099 (2 pcs.) Order number: T0051512599 Soft solution for cleaning lead-free solder with brass wool. For WDH safety rests..Replacement wools: T0051384099 (2 pcs.) Order number: T0051303199 For regeneration of solder tips. Proper use will prolong lifetime of tips. Environmentally safe.
WHP200 WHP1000 WHP3000 Order number: WHP200 120V, 50/60Hz, 200W infrared 150°F - 750°F (50°C - 400°C) 4.72” x 2.36” (120mm x 60mm) ESD safe Order number: WHP1000 120V, 50/60Hz, 850W infrared 150°F - 570°F (50°C - 300°C) 6.0” x 8.75” (150mm x 220mm) ESD safe Order number: WHP3000 120V, 50/60Hz, 200-600W infrared 150°F - 750°F (50°C - 400°C) ESD safe WHP80 WSB80 WSB150 Order number: T0052702899 Hot plate 3.2” x 2” 80W, 24V 150°F - 400°F (50°C - 200°C) 3.15” x 1.
Zero-Smog® | Series WHY FUME EXTRACTION? Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment. Most people thought that the move to leadfree soldering would be emission friendly. In reality leadfree soldering smoke emissions contain more breathable fine dust particles.
TECHNICAL DATA VOLUME EXTRACTION Voltage/Frequency Noise Emission Level Power Rating Maximum Vacuum Maximum Suction Capacity CFM Equivalent (Approx.
USA ITALY Apex Tool Group, LLC 1000 Lufkin Road Apex, NC 27539 Tel: +1 (866) 498 0484 Fax: +1 (919) 387 2639 Apex Tool S.r.l.
