Owner Manual

IMPORTANT INFORMATION FOR
RESILIENT SHEET FLOORING AND
LVF (LUXURY VINYL FLOORING)
1. After installation, all trafc and furniture should stay off
the oor for at least 24 hours to allow the adhesive to
dry. Do not wash any installation for 5 days.
2.
3. In order to prevent indentations and scratches, provide
glass, plastic, or other non-staining cups with at under-
surfaces not less than 2” in width for the legs of heavy
furniture or appliances. Equip swivel-type ofce chairs
and other rolling furniture with broad surface non-
staining casters at least 2” in diameter. Remove small
diameter buttons from the legs of straight chairs and
replace with metal glides that have bearing surfaces not
less than 1” in diameter.
4. Protect your oor against burns. Burns from the
glowing end of a cigarette, matches, or other extremely
hot items can damage resilient oors.
5. Do not ood oor, subject to frequent standing water,
or use in high-moisture areas. Flood mopping, hosing,
and frequent spills can loosen adhesive.
6. Protect your oor from tracked-in-dirt and grit
particles by using non-staining mats at all outside
entrances. Take time to remove any imbedded grit
particles from shoe soles before entering the room.
Avoid the use of rubber-backed mats, as certain rubber
compounds can permanently stain vinyl. Avoid tracking
in tar or asphalt from driveways, as this can also
discolor vinyl. Avoid the use of stiletto heels on your
oor.
7.
8. Avoid exposure to direct sunlight for prolonged periods.
During peak sunlight hours, the use of the drapes or
blinds is recommended. Prolonged direct sunlight can
result in discoloration, and excessive temperatures
might cause tile expansion.
9.
General Care and Maintenance
RESILIENT
11
BACK TO CONTENTS
Although these resilient oors are durable, all oor
coverings require some care to look their best, and many
problems can be prevented before they occur. The type
and frequency of trafc on your oor will determine the
frequency of maintenance needed. The type of oor and
even the color will also have some bearing on how much
care may be necessary. For example, solid color oors will
visually show scuffs, scratches,
Here are the proper steps for maintaining
your resilient oor:
All resilient oors have a good resistance to stains. They
are not affected by most common household spills;
however, any spill should be cleaned up immediately.
The longer the spilled materials are left on the oor, the
greater the risk of permanently staining the oor.
Do not use vinegar as a cleaning agent on these resilient
products. Wet mop as part of routine maintenance using
Hard Surface cleaner.
Upon completion of the installation, sweep or vacuum
thoroughly and remove any adhesive residue from
surface. Mineral spirits are ne for this. Lightly damp-
mop with ready-to-use Hard Surface Cleaner or the
recommended dilution ratio on the label of Hard
Surface Cleaner concentrate.
Remove any scuffs and excessive soil by careful
scrubbing. Certain types of rubber heel marks may be
removed by rubbing with a cloth dampened in mineral
spirits.
They can cause permanent damage. Do not use
vinegar, one-step cleaner/polishes, or oil soaps on
resilient products.
Proper care will help protect and maintain the appearance
and performance of your resilient oor. A care program
consists of key areas: 1) Preventive maintenance; 2) routine
maintenance; and 3) spot and spill removal.
Remember, the most effective part of any oor
maintenance program is the simplest: sweep, dust mop,
or vacuum your resilient ooring daily, or more
frequently if needed.
dirt, and general wear to a
greater degree than multi-colors of chips or patterns. Of
course, white or light colors will visually show staining to
a greater degree than darker colors. For this reason, solid
color and white oors should receive special attention in
regard to preventative maintenance and amount of care
provided. Good judgment when choosing the type and
style of oor will help prevent maintenance problems
before the oor is even installed.