User's Manual

9
1 Introduction
This User Guide will show you how to set up the NEOBIT 1014VA
ADSL Router, and how to customize its configuration to get the
most out of your new product.
Features
 Internal ADSL modem for high-speed Internet access
 10/100Base-T Router to provide Internet connectivity to all
computers on your LAN
 USB port for connecting a USB-enabled PC
 Network address translation (NAT), Firewall, and IP filtering
functions to provide security for your LAN
 Network configuration through DHCP Server and DHCP
Relay
 Services including IP route and DNS configuration, RIP,
and IP and DSL performance monitoring
 Configuration program you access via an HTML browser
System Requirements
In order to use the NEOBIT 1014VA ADSL Router, you must have
the following:
 ADSL service up and running on your telephone line, with
at least one public Internet address for your LAN
 One or more computers each containing an Ethernet
10Base-T/100Base-T network interface card(NIC) and/or a
single computer with a USB port
 An Ethernet hub/switch, if you are connecting the device to
more than one computer on an Ethernet network.
 For system configuration using the supplied web-based
program: a web browser such as Internet Explorer v5.0 or
later, or Netscape v4.7 or later